Table of Contents
Advertisement
Clearing the
Ethernet Client List
To restore a previously saved configuration file:
1 Under Tools, click Restore.
2 Click the backup method that you want to use. Available options include
FTP, TFTP, and HTTP.
If you clicked FTP, you need to provide the following information:
■
FTP Server IP Address – IP address of the FTP server from which the
■
backup file will be copied. The backup file must exist on this FTP
server.
User name and password – Your logon information to the FTP
■
server
Path – File path to (or location of) the backup file on the FTP server
■
File Name – File name of the backup file that you want to restore
■
If you clicked TFTP, you need to provide the following information:
■
File Name – File name of the backup file that you want to restore
■
TFTP Server IP Address – IP address of the TFTP server from which
■
the backup file will be copied. Before backing up via TFTP, verify
that the TFTP service on th target server is running.
If you clicked HTTP, the backup file must either be on the computer
■
that you are using to access the Web interface or on a network
location that can be accessed from the computer. Click Browse, select
the backup file, and then click Open.
3 Click Restore.
The settings in the backup file are restored and applied to the Bridge. This
operation may cause the Bridge to reboot.
If the Bridge was using an IP address setting other than the one contained
in the backup file, restoring the configuration will change the IP address.
If you want to continue configuring the Bridge, do the following:
1 Close your browser.
2 Return to the 3Com Wireless Infrastructure Device Manager, and then
click Refresh.
3 Select the device and click Configure to start a new configuration session.
A maximum of 16 clients (for example, computers and printers) can
associate with the Bridge. The Bridge keeps track of these clients based
Clearing the Ethernet Client List
55
Advertisement
Table of Contents
