Table of Contents
Advertisement
12
C
2: I
HAPTER
NSTALLING THE
Installing the
Locking Bar
B
RIDGE
Figure 5 Wall-Mounting the Bridge
C radle
3 Connect the power and Ethernet cables to the ports on the Bridge.
4 Snap the Bridge onto the cradle.
For additional security, install the locking bar in the cradle after the Bridge
is mounted to the wall. Use your own lock to secure it in place.
To install the locking bar:
1 Insert the locking bar through the opening in the side of the cradle, as
shown in Figure 6.
Figure 6 Inserting the Locking Bar
2 Push the locking bar through the opening until the hole on the locking
bar is exposed.
Advertisement
Table of Contents
