Clas Ohlson WH-1080 User Manual page 5

4. Assembly
Mounting and connecting the sensors
1
4
• The wind gauge's cable is connected to the input on the wind direction sensor.
• The wind direction sensor's cable is connected to the input marked "Wind" on the thermo-hygrosensor
(see fig. 6).
7
• The rain sensor's cable is connected to the input marked "Rain" on the thermo-hygrosensor (see fig. 7).
Important:
On the wind direction sensor's edge are the letters "N", "E", "S" and "W" which stand for the four
directions (north, east, south, and west). The wind direction sensor must be aligned with the points of
the compass; otherwise the readings will not be accurate.
2
5
3
6
5