SMC Networks SMC7004ABR Quick Installation Manual page 26

Using a password can protect your Barricade from unauthorized changes. Not using a password
can easily leave your Barricade—and your network—open to security risks. We recommend
using a password for the security of your network. If you use a password, write it down and keep
it in a safe place, or make sure you can remember it.
6. In the "Change Password" screen, enter
your current password in the "Current
Password" field. If you have not yet set a
password, leave it blank. Choose a
password for your Barricade and enter it
in the next two fields, "New Password"
and "Re-Enter Password for
Verification."
7. Click "ENTER" when finished.
8. Select your time zone from the list and
click "ENTER."
The LAN screen is where you configure the
LAN (Local Area Network) settings of
your Barricade. These settings will only be
visible to your local network and not to the
Internet.
9. In most applications, you should not
change the "IP address" from the
default (192.168.2.1). However, if you
are implementing your Barricade into
an existing network, you may need to
Page 22