This includes frozen fruit, frozen
yoghurt, ice cream or ice. These
can be added up to the level
marked FROZEN INGREDIENTS
for the corresponding number of
7 Screw the lid onto the goblet.
8 Either put the cap into the lid, then
turn. Or place the stirrer in the
The stirrer can be used when
blending thick mixtures or when
large quantities of frozen items are
9 Press the MIX button for up to 30
seconds, this is to start the mixing
process, then press the SMOOTH
button. Allow the ingredients to
blend until smooth.
Use the stirrer by moving it in an
anti clockwise direction.
10 Place a glass under the tap, press
the MIX button and press down on
the dispensing tap lever.
Thinner drinks may dispense without
having to switch on the power unit.
Use the stirrer to assist when
dispensing thick smoothie drinks.
To help dispense the last amount
of a thick smoothie drink, add a
few tablespoons of liquid to
increase the flow.
11 When the glass is full, switch off
and release the lever.
Switch off, remove the goblet and
pour the drink.
To make a thinner smoothie drink
add more liquid.
To make a thicker smoothie drink
add more frozen ingredients but
do not exceed the frozen limit
marked on the goblet.
Before fitting the lid, push the solid
ingredients into the liquid using the
Use the PULSE button to operate
the power unit in a start stop
action to control the texture of
your drink. Take care as this
automatically selects the higher
speed and may cause the drink to
be thrown up the sides and onto
the lid of the goblet.
After blending, some drinks may
not be completely smooth due to
seeds or the fibrous nature of
Some drinks may separate on
standing, therefore it's best to
drink them straight away.
Separated drinks should be stirred
Never blend dry ingredients (eg
spices, nuts) or run the Smoothie
Don't use the blender as a storage
container. Keep it empty before
and after use.
Some liquids increase in volume
and froth during blending eg milk,
so do not overfill and ensure the lid
is correctly fitted.
To ensure long life of your
Smoothie Blender, never run it
continuously for longer than 60
Never blend food that has formed
a solid mass during freezing, break
it up before adding to the goblet.
care and cleaning
Always switch off, unplug and
dismantle before cleaning.
Never let the power unit, cord or
plug get wet.
Empty the goblet before
unscrewing it from the blade unit.
Always wash immediately after
use. Don't let food dry onto the
goblet assembly as this will make
Don't wash any part in the
Regularly dismantle the tap and
clean the parts thoroughly.
Before dismantling the blender, half
fill the goblet with warm water. Fit
the lid and cap then place on the
power unit. Switch to MIX and
whilst running, open the tap and
allow the water to drain into a
container to clean the valve. This
can be repeated until the water
runs clear. If further cleaning is
necessary dismantle the unit first.