Hitachi StarBoard FX-79E1 User Manual page 9

StarBoard FX-79E1/89WE1
(5) Precautions Regarding Setup Environment
Wall mounting work should be performed by a construction
specialist.
Improper work m
falling during operation. Always use the specified mounting unit
Improper assembly may cause the product to fall over.
There is risk of personal injury if the product falls over.
Completely tighten the screws of all individual parts.
Install this product on a flat wall.
Installing this product on an uneven wall such as bumpy or curved
surfaces may cause the product to operate improperly or fall over,
resulting in personal injury or product malfunction.
Do not place in a location with flammable or corrosive gas.
Placing this product in a location where there is flammable or
corrosive gas may result in fire or damage to this product.
There is a particular danger of explosion in the case of flammable gas.
Do not place in a location with flammable or corrosive gas.
Do not touch internally mounted parts.
Directly toughing internally mounted parts inside this product may
result in personal injury or damage to this product.
Do not place in locations subject to excess moisture, dust, smoke, or
steam.
Placement in a location such as next to a kitchen or a humidifier may
result in fire or damage to this product.
Do not use this product near water.
If water somehow gets inside this product, immediately disconnect
the USB cable and contact a support center.
Continued use may result in fire or damage to this product.
WARNINGS
ay result in death or personal injury due to the product
CAUTIONS
8
Safe Handling
.
English