Download Print this page

Advertisement

StarBoard FX-79E1
StarBoard FX-89WE1
User's Guide
Read this User's Guide and carefully retain it for future reference.
Before using this product, carefully read and fully understand the safety instructions. Store
this User's Guide nearby for ease of reference.
FXE1-ML120901

Advertisement

   Related Manuals for Hitachi StarBoard FX-79E1

   Summary of Contents for Hitachi StarBoard FX-79E1

  • Page 1

    StarBoard FX-79E1 StarBoard FX-89WE1 User’s Guide Read this User's Guide and carefully retain it for future reference. Before using this product, carefully read and fully understand the safety instructions. Store this User's Guide nearby for ease of reference. FXE1-ML120901...

  • Page 2

    Also, the company makes no warranty as to the product's suitability, merchantability or fitness for a particular intended use. All products of Hitachi Solutions, Ltd., described in this User's Guide are presently for sale or are site-licensed. Users who purchased the aforesaid product(s) will bear the costs of all required services, repairs,...

  • Page 3: Product Assurance Provisions

    Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. Other trademarks and product names are trademarks and/or registered trademarks of their respective holders Manual Creation Dates September 2012, Fourth edition FXE1-ML120901 All Rights Reserved, Copyright(c) 2011, 2012 Hitachi Solutions, Ltd. English...

  • Page 4

    StarBoard FX-79E1/89WE1 Introduction Thank you very much for purchasing Hitachi solutions’ StarBoard FX-79E1/89WE1 (henceforth referred to as “StarBoard”). This User’s Guide has been created for people who already have a working knowledge of personal computers (henceforth referred to as “PC”).

  • Page 5

    StarBoard FX-79E1/89WE1 Safe Handling Safe Handling Markings and Symbols Various markings and symbols are used in this User’s Guide and on this product, to ensure the safe and correct use of this product and to prevent personal injury and property damage. These symbols and their meanings are as explained below.

  • Page 6

    StarBoard FX-79E1/89WE1 Safe Handling Safe Precautions Required Precautions (1) Precautions Regarding Operation WARNINGS Do not make modifications. Do not make any adjustments, repairs, or modifications not given in this User's’Guide as doing so may lead to personal injury or damage to the product.

  • Page 7

    StarBoard FX-79E1/89WE1 Safe Handling (2) Dealing with Trouble CAUTIONS What to do in case of emission of smoke, strange odor, or strange noise If an abnormal condition such as emission of smoke, strange odor, or strange noise happens to occur for some reason, immediately disconnect the product's’USB cable from the PC.

  • Page 8

    StarBoard FX-79E1/89WE1 Safe Handling NOTICE Disconnect the USB cable during extended periods of non-use. For safety reasons, disconnect the USB cable if the product is not going to be used for an extended period of time. Failure to comply may result in malfunction.

  • Page 9

    StarBoard FX-79E1/89WE1 Safe Handling (5) Precautions Regarding Setup Environment WARNINGS Wall mounting work should be performed by a construction specialist. Improper work m ay result in death or personal injury due to the product falling during operation. Always use the specified mounting unit Improper assembly may cause the product to fall over.

  • Page 10

    StarBoard FX-79E1/89WE1 Safe Handling NOTICE Regarding the setup environment Set up this product on a level floor surface with a weight bearing capacity of 150 kg/m or more, and which is made of floor materials that will not deform or become depressed due to movement by casters.

  • Page 11

    StarBoard FX-79E1/89WE1 Safe Handling Careful thought was given to the cautions on this device and in this User's’Guide. However, unanticipated circumstances might occur. When operating this product, users themselves must exercise caution as well as follow instructions. WARNINGS Warnings Contents Page(s) Install this product on a vertical and flat surface.

  • Page 12

    Contents StarBoard FX-79E1/89WE1 Safe Handling NOTICE Notice Contents Page(s) - Select a level and stable position. - Do not set it up near equipment that might generate electromagnetic waves radio frequencies, such as radio transmitters, televisions, copying machines P.1-6 or air conditioners.

  • Page 13: Table Of Contents

    1.2 P ......................... 1-2 ARTS HECK 1.2.1 StarBoard ........................1-2 1.2.2 Stand (option) ......................... 1-3 1.2.3 StarBoard FX-79E1/89WE1 Stand Stay (option) ............1-3 1.3 R ....................... 1-5 OLE OF 1.3.1 StarBoard ........................1-5 1.3.2 Function Area ......................... 1-6 1.4 A ......................

  • Page 14: Introduction

    StarBoard FX-79E1/89WE1 Introduction 1. Introduction 1.1 Preparations This chapter describes the preparations to be made before using StarBoard. First-time users of StarBoard should read through this chapter. 1.1.1 Product Outline The StarBoard is an extremely convenient and easy-to-use electronic whiteboard. After setting...

  • Page 15: Parts Check

    After unpacking, make sure that all the following parts are present. 1.2.1 StarBoard [1] Parts Name StarBoard USB Cable (5m) Wall-mounting bracket Nut & bolt set Stylus pen StarBoard Software DVD-ROM StarBoard Software Startup Guide StarBoard FX-79E1/89WE1 Startup Guide Warranty Sheet English...

  • Page 16: Stand (option)

    StarBoard FX-79E1/89WE1 Introduction 1.2.2 Stand (option) [1] Parts Name Qty. Stand vertical support Stand crossbar Stand foot with casters Board receiving bracket (left-hand version) Board receiving bracket (right-hand version) Board fixing bracket Hex socket head cap screw, with collar Hex socket head cap screw...

  • Page 17: Starboard Fx-79e1/89we1 Stand Stay (option)

    StarBoard FX-79E1/89WE1 Introduction 1.2.3 StarBoard FX-79E1/89WE1 Stand Stay (option) [1] Parts Name Qty. stay Nut & bolt set English...

  • Page 18: Role Of Each Part

    StarBoard FX-79E1/89WE1 Introduction 1.3 Role of Each Part 1.3.1 StarBoard (1) Function Area (Left and Right) (4) Casters (Parts of stand) Shortcut buttons for functions that are These are the casters for moving the board. After frequently used in applications are located setting up the StarBoard, be sure to lock the here.

  • Page 19: Function Area

    StarBoard FX-79E1/89WE1 Introduction 1.3.2 Function Area The function area is provided with shortcut keys for the functions that are frequently used in the StarBoard Software. Use by clicking the middle of the symbol with your pen or finger. When using Windows, all buttons except for the one-time right click switching button can be customized.

  • Page 20: Assembly And Setup

    StarBoard FX-79E1/89WE1 Introduction 1.4 Assembly and Setup When setting up the board, keep the following in mind. WARNINGS Install this product on a vertical and flat surface. Do not install this product on a slanting surface, ceiling or uneven wall. Otherwise, the equipment might fall, possibly resulting in injury, or the impact might cause product failure.

  • Page 21

    StarBoard FX-79E1/89WE1 Introduction [1] Install the wall-mounting brackets Determine the height at which the board will be installed, and install the wall-mounting brackets onto the StarBoard at the positions shown in the diagram below. The wall-mounting brackets are provided with the StarBoard. ((3) on page 1-2)

  • Page 22

    StarBoard FX-79E1/89WE1 Introduction [2] Install the board Prepare the following tools. -Spanner (10mm diameter) -Hexagon wrench (large, small) *Provided as an accessory -Screwdriver WARNINGS Wall mounting work should be performed by a construction specialist. Improper work m ay result in death or personal injury due to the product falling during operation.

  • Page 23: Stand Setup Method

    StarBoard FX-79E1/89WE1 Introduction 1.4.2 Stand Setup Method Reconfirm that all the parts are present before assembling and setting up the stand (option). WARNINGS Tighten the screws securely. Failure to comply may cause the stand to collapse, resulting in personal injury, or may cause damage to this product due to shock of impact from the board falling.

  • Page 24

    StarBoard FX-79E1/89WE1 Introduction [2] Adjust the height Follow the diagram below to install the stay. The numbers in the diagram correspond to the numbers in the parts tables on pages and 1-4 of this User's Guide. 372mm 1108mm 372mm Tighten with...

  • Page 25

    StarBoard FX-79E1/89WE1 Introduction 535mm 1108mm 535mm Tighten with the spanner Back of the board 535mm 1108mm 535mm <FX-89WE1> English 1-12...

  • Page 26

    StarBoard FX-79E1/89WE1 Introduction [3] Adjust the height Install the board on the stand assembled in step (1). Install the board according to the following procedure. Furthermore, this step should be performed by at least two people. Numbers in the diagram correspond to numbers in the parts list on page 1-3.

  • Page 27: Equipment Connection Method

    StarBoard FX-79E1/89WE1 Introduction 1.4.3 Equipment Connection Method Before Starting to Connect Equipment Install the StarBoard Software on your PC before starting to connect equipment. The equipment might not operate correctly if it is connected without the software being installed. Connect the PC, projector and StarBoard according to the following procedure.

  • Page 28

    StarBoard FX-79E1/89WE1 Introduction About PC Earth Depending on your PC, an incorrect operation might be caused by PC noise via the USB cable. If this happens, verify that the earth of your PC's power supply cable is connected. If the earth is not connected, it might cause an incorrect operation.

  • Page 29: How To Use

    StarBoard FX-79E1/89WE1 How to use 2. How to Use 2.1 Basic Operations This chapter gives a description of the basic operations of the board. 2.1.1 Character Input To input characters, use your finger or the stylus that was provided with the product.

  • Page 30: Pc Operations

    StarBoard FX-79E1/89WE1 How to use - Using your finger Extend your finger and touch the board. In the same way as the stylus pen, if you touch the board with anything other than your finger or you are too close to the board, it might cause an incorrect operation.

  • Page 31

    StarBoard FX-79E1/89WE1 How to use CAUTION Do not strike the board forcefully with the stylus pen, bend it, or apply an excessive load to it. Failure to comply may result in damage to the stylus pen or personal injury English...

  • Page 32: Start Method

    StarBoard FX-79E1/89WE1 How to use 2.2 Start Method 2.2.1 Start Method (Windows virsion) (1) Connect the devices with reference to the connection method on page 1-11. (2) Turn on the power switch of the projector. (3) Turn on the power switch of the PC to start Windows.

  • Page 33: Start Method (mac Version)

    StarBoard FX-79E1/89WE1 How to use 2.2.2 Start Method (Mac version) (1) Connect the devices with reference to the connection method on page 1-11. (2) Turn on the power switch of the projector. (3) Turn on the power switch of the PC to start Mac (4) Adjust the position of the projector so that the Mac screen projected by the projector is within the input area (refer to page 1-4 of this User's Guide).

  • Page 34: Appendix

    StarBoard FX-79E1/89WE1 Appendix 3. Appendix 3.1 Troubleshooting Before assuming the product is broken, be sure to check adjustments, proper handling procedures, the possibility of faulty cable connections, etc. Recognition-Related Problems Problem What to check What to do Is the USB cable connected to Connect the USB cable to the PC.

  • Page 35

    StarBoard FX-79E1/89WE1 Appendix Input-Related Problems Problem What to check What to do The input position does not position alignment Perform proper position alignment. match. been performed properly? Other than the above Contact a support center. The position cannot be Have the StarBoard and Adjust the position of the StarBoard aligned properly.

  • Page 36: System Specifications

    StarBoard FX-79E1/89WE1 Appendix 3.2 System Specifications Item Specification Model name StarBoard FX-79E1 StarBoard FX-89WE1 Detection Infra-red interception system* method LED pitch Sampling rate Approx. 66 points/second Interface USB 1.1 (cable length:5m) Effective screen Approx.79inches Aspect ratio 4:3) 、 Approx.89inches Aspect...

  • Page 37: Proper Care And Cleaning

    StarBoard FX-79E1/89WE1 Appendix 3.3 Proper Care and Cleaning Clean the StarBoard periodically so that you may use it for a long time to come. (1) Cleaning the StarBoard ・ To clean the StarBoard, use a soft cloth dampened with whiteboard cleaner or a diluted neutral cleansing agent that does not contain a polishing compound.

  • Page 38: Product Warranty Policy

    StarBoard FX-79E1/89WE1 Appendix 3.4 Product Warranty Policy 1. During the free warranty service period, if a malfunction occurs during normal use, the malfunction will be corrected without charge, according to the provisions of the warranty. Furthermore, if the customer registration card accompanying the warranty is not returned to our company, the customer information will not be registered;...

  • Page 39

    StarBoard FX-79E1/89WE1 Appendix 5. If this product malfunctions, review the contents of this user’s guide. If the problems remain irreparable, contact the dealer. The dealer will determine whether or not the product must be repaired, so please contact them. If the customer sends the product to our company without RMA (Return Merchandise Authorisation) number, it might not be covered by warranty.

This manual also for:

Starboard fx-89we1

Comments to this Manuals

Symbols: 0
Latest comments: