Page 1
T-19WX StarBoard StarBoard T-19WX User's Guide Read this user’s guide and carefully retain it for future reference. Before using this product, carefully read and fully understand the safety instructions. Store this User’s Guide nearby for ease of reference. T19-ML110801 Hitachi Solutions, Ltd...
Page 2
Also, the company makes no warranty as to the product’s suitability, merchantability or fitness for a particular intended use. All products of Hitachi Solutions, Ltd., described in this user’s guide are presently for sale or are site-licensed. Users who purchased the aforesaid product(s) will bear the costs of all required services, repairs,...
70.53K02G00x (StarBoard T-19WX) , AH00219 * The term “x” as used in this manual denotes the model No. of the product. The StarBoard T-19WX incorporates WALTOP’s 19-inch LCD monitor integrated digitizer technology. Windows is registered trademarks of Microsoft Corporation (U.S.) and in other countries.
Page 4
T-19WX Safe Handling StarBoard Safe Handling Markings and Symbols Various markings and symbols are used in this user’s guide and on this product, to ensure the safe and correct use of this product and to prevent personal injury and property damage. These symbols and their meanings are as explained below.
Page 5
T-19WX Safe Handling StarBoard Safety Precautions Always comply with them WARNING Securely insert the power plug into the Before moving this product, detach the power socket. power plug and the power cable. If it is not plugged in securely, The power cable might be damaged, overheating will occur, possibly possibly resulting in electric shock resulting in electric shock or fire.
Page 6
T-19WX Safe Handling StarBoard Safety Precautions Always comply with them WARNING Do not use a power cable other than the Do not open or alter the cabinet of this accessory power cable. product. If a power cable other than the The cabinet contains high-voltage accessory power cable is used, fire areas, so electric shock or other...
Page 7
WARNING In the following cases, unplug the product from the AC Adaptor socket and ask the technical support of Hitachi Solutions. a. After the power cord or AC Adaptor plug is damaged. b. After liquid is spilled onto the main unit.
Page 8
T-19WX Safe Handling StarBoard Careful thought was given to the cautions on this device and in this user’s guide. However, unanticipated circumstances might occur. When operating this product, users themselves must exercise caution as well as follow instructions. WARNING Warning Details Page Use the AC Adaptor supplied with this product.
StarBoard for the first time. 1.1.1 Product Overview StarBoard T-19WX is a convenient and easy-to-use tablet-type interactive electronic board that lets you operate a PC with a stylus pen, and write text and images to a PC screen in real time as well as simultaneously input those to the PC.
USB cable (1.5m) Audio cable (stereo mini-plug) (10) Pen tip replacement pin set (11) StarBoard Software DVD-ROM (12) StarBoard T-19WX Startup Guide (13) StarBoard Software Startup Guide (14) Warranty Sheet (*1) The quantity of power cable is depended on the region. (10)
T-19WX Introduction StarBoard 1.3 Part Names and Functions 1.3.1 Front Screen (1) LCD and tablet operating area (4) Front switch panel Receives text and graphical These switches are used to turn the information entered with the stylus power ON/OFF, enter OSD menu pen, and transmits the data to a PC.
Page 13
T-19WX Introduction StarBoard 1.3.2 Front Switch Panel (1) Power button (4) MENU/SELECT button This button turns the StarBoard LCD This button is used to display the monitor ON/OFF. OSD menu. Press it after making menu selections to apply those. (2) Power indicator This indicator turns green when button power is supplied normally to the...
T-19WX Introduction StarBoard 1.3.3 Connector Panel StarBoard Bottom View (1) USB port (4) VGA input port A USB cable is connected here. This port is used to connect a PC via RGB cable to display images from (2) Power port the PC.
T-19WX Introduction StarBoard 1.4 Assembly and Setup Keep the following points in mind when installing the StarBoard. Select a stable, flat location. Avoid installing in locations that are dusty, extremely hot, cold, or humid. Also avoid installing in locations exposed to direct sunlight. 1.4.1 Adjusting the Stand CAUTION Hold the body firmly and slide the stand slowly when adjusting it.
T-19WX Introduction StarBoard (2) Slide the stand to the desired angle, and release the lever. Use the screen at an easily viewable angle, taking into account external light and ceiling lighting, which may reflect off the screen. 14° 66° (3) Check that the lever and stand are secure. 1.4.2 How to Use the Pen Holder The T-19WX comes with a pen holder on the back side.
T-19WX Introduction StarBoard 1.4.3 Connection Procedure Before Connecting Equipment Install the StarBoard Software on your PC before connecting equipment. Equipment may not function normally if connections are made without first installing the software. WARNING Use the AC Adaptor supplied with this product. Use only AC Adaptor or power cables specified by the manufacturer.
Page 19
T-19WX Introduction StarBoard (1) Connect the RGB cable to the VGA input port on the side of the StarBoard, and tighten the screws to fasten. Connect the other end of the cable to the PC VGA port, and tighten the screws to fasten. (2) Connect the USB cable to the USB port on the side of the StarBoard.
T-19WX Usage StarBoard 2. Usage Procedures This section describes the basic procedures for using StarBoard. For information on using advanced StarBoard features, see the StarBoard Software Installation Guide, or StarBoard Software Online Help. 2.1 Start Method 2.1.1 Start Method (Windows version) This section describes how to turn the StarBoard on for Windows user.
T-19WX Usage StarBoard 2.1.2 Start Method (Mac OS version) This section describes how to turn the StarBoard on for Mac user. (1) Turn on the StarBoard power. Push the power button (2) Turn on the Mac and allow Mac OS to start. (3) Select “Go”...
T-19WX Usage StarBoard 2.2 Using the Stylus Pen This section describes how to use the StarBoard stylus pen. 2.2.1 How to Use the Stylus Pen The stylus pen has a power switch. Battery life can be prolonged by switching the power switch OFF when not in use.
T-19WX Usage StarBoard 2.2.3 Stylus Pen Settings The stylus pen has one pen tip button, and two side buttons. Mouse actions can be assigned to these three buttons. The default button settings are summarized in the following table. Button User action Corresponding mouse Corresponding mouse action (Windows)
T-19WX Usage StarBoard 2.2.4 Changing the Battery in the Stylus Pen The stylus pen contains a single AAA alkaline dry cell battery. If the pen begins to operate erratically (e.g., if pen input is cut off), change the battery as described below. Note that battery life is approximately 1,800 hours under normal usage.
T-19WX Usage StarBoard (3) Put the stylus pen back together. CAUTION When changing the battery, be careful not to close the pen’s rear part too forcefully. If too much force is applied when closing the rear part of the stylus pen, the pen may be damaged.
T-19WX Usage StarBoard 2.3 Using the OSD Menu The OSD menu is used when adjusting the StarBoard LCD screen. OSD is an abbreviation for On-Screen Display. The OSD feature allows you to view and adjust the settings for the display on the screen. 2.3.1 OSD Buttons and Their Functions •MENU/SELECT button •...
T-19WX Usage StarBoard 2.3.2 OSD Adjustment Options (1) BRIGHTNESS Used to adjust screen brightness. (0-100) (2) CONTRAST Used to adjust colour contrast. The larger the value, the brighter the image will be. (0-100) (3) LCD ADJUSTMENT CLOCK : Used to adjust screen size. (0-100) PHASE : Used to adjust the sampling timing (phase) for converting the analogue input signal to a digital input signal.
Page 28
T-19WX Usage StarBoard (4) COLOUR TEMPRATURE Used to adjust the colour temperature of the screen. (9300K, 6500K, USER, SRGB) USER : Used to adjust the red, green, and blue colours of the screen. (0-100) RETURN : Used to return to the previous page. (5) ECO MODE Used to turn the ECO mode ON, and limit brightness setting from 0 to 20 to reduce power consumption.
Page 29
T-19WX Usage StarBoard (7) OTHER SETUP SMOOTH : Used to adjust the smoothness of the image. (0-3) Use is not possible at a resolution of 1440 × 900 (WXGA+). OSD H.POSITION : Used to adjust horizontal position of OSD window. (0-100) OSD V.POSITION : Used to adjust vertical position of OSD window.
T-19WX Appendix StarBoard 3. Appendix 3.1 Troubleshooting First, check adjustments and handling methods and check for poor cable connections. Those are often the causes of problems when nothing is actually broken. Screen display-related problems In this case Check this And do this PC screen does not Is the PC power on? To deal with problem see the PC...
Page 31
T-19WX Appendix StarBoard Stylus pen-related problems In this case Check this And do this Stylus pen does not operate. StarBoard Software may be Uninstall StarBoard Software, and damaged or may not be then reinstall. (For details on how to installed correctly. install StarBoard software, see “StarBoard Software Installation ”...
Page 32
T-19WX Appendix StarBoard Function button-related problems In this case Check this And do this Function buttons don’t Is the USB cable connected Connect USB cable to PC. (For details operate. properly? on how to connect, see “1.4.3 Connection Procedure” on page 1-9 of this User’s Guide.) Is the StarBoard Software Function button features require the...
T-19WX Appendix StarBoard 3.3 How to Take Care of the StarBoard Please clean your StarBoard periodically so it will continue to work for a long time. (1) Cleaning and care • Use a dry, soft cloth to clean the StarBoard display surface. Do not use detergents.
T-19WX Appendix StarBoard 3.6 Provisions of Product Warranty 1. During the free warranty service period, if a malfunction occurs during normal use, the malfunction will be corrected without charge, according to the provisions of the warranty. Furthermore, if the customer registration card accompanying the warranty is not returned to our company, the customer information will not be registered, so free repairs might be unavailable.
Page 37
T-19WX Appendix StarBoard In the event of a malfunction in this product caused by the connection to this product of equipment other than the equipment specified by our company. In the event that there is no abnormality in this product, but a defect in a part other than this product was detected or remedied.
Need help?
Do you have a question about the StarBoard T-19WX and is the answer not in the manual?
Questions and answers