Hitachi StarBoard FX-79E1 User Manual page 12

StarBoard FX-79E1/89WE1
- Select a level and stable position.
- Do not set it up near equipment that might generate electromagnetic waves
or
radio frequencies, such as radio transmitters, televisions, copying machines
or air
conditioners.
- Avoid locations that are dusty, that are subject to extremely high or low
temperatures or humidity, or that are exposed to direct sunlight.
Do not touch board at the time of plugging USB cable.
It may cause of malfunction.
Do not scrape or strike the board surface by stylus pen.
Failure to comply may result in damage on the board surface.
Use an input tool with a thickness of least 7 mm.
When inputting to this product, use a tool that is at least 7 mm. If a pen or
similar tool with a thickness of less than 7 mm is used, the input will be
unstable.
Also, do not use tools with a sharp tip, such as a ballpoint pen. If such a tool is
used incorrectly, it could damage the surface of the board.
Sleep mode is unavailable on Windows XP.
Unplug USB cable from StarBoard if you use sleep mode.
NOTICE
Notice Contents
11
Contents
Safe Handling
Page(s)
P.1-6
P.1-11
P.2-1
P.2-1
P.2-1
English