Stand Setup Method - Hitachi StarBoard FX-79E1 User Manual

StarBoard FX-79E1/89WE1

1.4.2 Stand Setup Method

Reconfirm that all the parts are present before assembling and setting up the stand (option).
WARNINGS
Tighten the screws securely.
Failure to comply may cause the stand to collapse, resulting in personal injury, or
may cause damage to this product due to shock of impact from the board falling.
CAUTION
This work should be performed by at least two people.
The board might fall and cause injury or its impact might cause damage.
[1] Assemble the stand
FX-79E1/89WE1 is available with the stand. Follow the diagram below to install the board on
the stand. The numbers in the diagram correspond to the numbers in the parts tables on pages
and 1-3 of this User's Guide.
(7)
Long Short
Align both feet with the
longer side facing forward
(1)
(4)
(9)
(5)
(6)
(9) (2)
Fasten with a
Phillips screwdriver.
(3)
(8)
1-10
Introduction
(7)
Fasten with an
Allen wrench.
English