Booster Function - Smeg SIHP3+WG4 Directions For Use Manual

Egg timer function
Action
Activate the hob
Select« Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
As soon as the selected cooking time is finished the timer displays blinking [00] and a sound rings.
To stop the sound and the blinking it is enough to press the key [

Booster function

The booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones works during 10 minutes with an ultra high power.
The booster is foreseen for example to heat up rapidely big quantities of water, like nuddles
cooking.

Start up / Stop the booster function:
Action
Zone selection
Increase power
Start up the booster
Stop the booster

The booster function [ P ] can also be started directely:
Action
Zone selection
Start up the booster
Stop the booster

Power management:
The hole cooking hob is equipped by a maximum of power. When the booster function is
activated, and not to exceed the maximum power, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed ( [ 6 ] or [ 8 ] ).
Heating zone selected
[ P ] is displayed
Control panel
Press on key [ 0/I ]
Press on key [
Press on key [ - ]
Press on key [
Control panel
press key [ + ]
touch key [ + ]
press key [ P ]
press key [ - ]
press key [ P ]
Control panel
press key [ + ]
press key [ P ]
press key [ - ]
press key [ P ]
The other heating zone:
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Display
The zone control lights are on
] Time [ 00 ] minutes
[60] wents to 59,58,57,......
] The time increases...
(example: power level 9)
9
].
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ P ] during 10 mn
[ 9 ]
[ 9 ]
Display
[ 0 ]
[ P ] during 10 mn
[ 9 ]
[ 9 ]