Auto-Vent 2.0 Function - Smeg SIM3844D Manual

Warming Function
This function allows you to keep
cooked food warm or to keep
water on the boil.
To activate the Warming function, first turn
on the hob, then:
1. Select a cooking zone.
2. Press the button to activate the
function. The
display of the selected cooking zone.
To deactivate the Warming function:
1. Select the cooking zone on which the
function is active.
2. Press the button.

3.5 Auto-Vent 2.0 function

• This function allows you to
control the speed of the hood
extractor fan via a wireless
connection.
• The hood must be designed to
use the Auto-Vent 2.0 function.
• The connection is always
unidirectional, from the hob to
the hood: it is not possible to
control the hob via the hood.
The Auto-Vent 2.0 function is disabled by
default, but can be enabled from the user
menu. Once enabled, the
always remains dimly lit.
symbol appears on the
button
Use
This function has an automatic and a
manual mode:
• Automatic mode (default), adjusts the
hood extractor fan speed according to
the total power of the appliance (see
"User menu" - option U8)
• Manual mode allows you to adjust the
extractor fan speed by pressing the
button.
After switching on the hob, to activate
manual mode:
1. Press the
at full brightness.
2. Each subsequent press of the button
increases the hood fan speed according
to a cyclic sequence with 5 levels of
adjustment, from 0 (off) to 4 (maximum
speed).
To go back to automatic mode, the
appliance has to be switched off and on
again.
Refer to the hood manual for more
detailed information.
button, which will light up
63