5.3 Section cut from the countertop 5.4 Mounting 5.5 Fixing brackets 5.6 Instructions for the installer We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance’s aesthetic and functional qualities. For further information on the product: www.smeg.com...
Instructions 1 Instructions • Do not modify this appliance. • Do not insert pointed metal 1.1 General safety instructions objects (cutlery or utensils) into the slots in the appliance. Risk of personal injury • Do not try to repair the appliance •...
Instructions • Never leave objects on the 1.2 Manufacturer’s liability cooking surface. The manufacturer declines all liability • Do not use the appliance to heat for damage to persons or property rooms for any reason. caused by: • Use of the appliance other than For this appliance that specified •...
Instructions 1.4 Disposal Our appliances are packaged in non- polluting and recyclable materials. This appliance must be disposed of • Deliver the packing materials to the separately from other waste appropriate recycling centre. (Directives 2002/95/EC, 2002/ 96/EC, 2003/108/EC). The appliance Plastic packaging does not contain substances in quantities Danger of suffocation...
Instructions 1.7 How to read the user manual This user manual uses the following reading conventions: Instructions General information on this user manual, on safety and final disposal. Description Description of the appliance and its accessories. Information on the use of the appliance and its accessories, cooking advice.
Description 2 Description 2.1 General Description Outer diameter Max. power draw Power draw in Zone (mm) (W)* Booster function (W)* 1300 1400 2300 3000 * power levels are indicative and can vary according to the pan used or the settings made. Advantages of induction cooking •...
Description 2.2 Symbols OFF setting The cooking zone is OFF. Increase/decrease setting Turn the knob clockwise or anti-clockwise to increase or decrease the power for the cooking zone whose value is shown on the displays. Booster setting Using this setting the Booster function of the cooking zone activates.
3 Use High temperature Danger of fire or explosion 3.1 Instructions High temperature • Do not use or leave flammable materials near the appliance or directly Danger of burns underneath the hob. • Do not cook in closed tins or containers, •...
3.2 Preliminary operations 3.3 Using the hob In order to remove any moisture that could On first connection to the electrical have accumulated during the manufacturing mains, an automatic check will be process and for the electronic circuits and carried out that will switch on all control keypad to work properly: indicator lights for a few seconds.
Page 10
Unsuitable cookware: Limiting the cooking duration • Copper, stainless steel, aluminium, The hob has an automatic device which fireproof glass, wood, ceramic and limits the duration of use. terracotta cookware. If the cooking zone settings are not To see whether the pan is suitable, bring a changed, the maximum duration of magnet close to the bottom: if it is attracted, operation for each zone depends on the...
Page 11
Advice on energy-saving Power levels • The diameter of the base of the pan must The power in the cooking zone can be correspond to the diameter of the adjusted to various levels. The table shows cooking zone. the levels suitable for various types of cooking.
Page 12
Heating accelerator Booster function Each cooking zone is equipped The booster function allows you to with a heating accelerator that activate the cooking zone at allows the maximum power to be maximum power as long as 5 delivered for a time that is minutes.
Page 13
Power control Controls lock The hob is fitted with a power control The controls lock is a device that module that optimises/limits consumption. If protects the appliance from the overall set power level exceeds the accidental or inappropriate use. maximum limit permitted, the electronic circuit board will automatically manage the 1.
Cleaning and maintenance 4 Cleaning and maintenance 4.3 Ordinary weekly cleaning Clean and maintain the hob once a week 4.1 Instructions using an ordinary glass cleaning product. Always follow the manufacturer’s Improper use instructions. The silicon in these products Risk of damage to surfaces creates a protective, water-repellent membrane which also resists dirt.
Cleaning and maintenance Changes in colour do not affect the 4.5 What to do if... operation and stability of the glass. These The hob does not work: are not alterations to the material of the hob • Make sure that the hob is connected but just residues which have not been and that the main switch is turned on.
Installation 5 Installation • 220-240 V 1N~ 5.1 Electrical connection Power voltage Danger of electrocution Use a 3 x 4 mm² three-core cable. • Have the electrical connection • 220-240 V 3~ performed by authorised technical personnel. • Use personal protective equipment. •...
Installation Fixed connection 5.2 Safety instructions Fit the power line with an all-pole circuit Heat production during appliance breaker in compliance with installation operation regulations. Risk of fire The circuit breaker should be located near the appliance and in an easily reachable •...
Installation 5.3 Section cut from the countertop 5.4 Mounting Over built-in oven unit The following operation requires building and/or carpentry work The clearance between the hob and the and must therefore be carried out kitchen furniture or other installed by a competent tradesman. appliances must be enough to ensure Installation can be carried out on sufficient ventilation and air discharge.
Installation On top of an empty kitchen unit or Hob seal drawers To prevent leakage of liquid between the If there are other pieces of furniture (lateral frame of the hob and the countertop, place walls, drawers, etc.), dishwashers or fridges the adhesive seal provided along the entire under the hob, a double-layer wooden outer edge of the hob before assembly.
Installation 5.6 Instructions for the installer • The plug must be accessible after installation. Do not bend or trap the power cable. • The appliance must be installed according to the installation diagrams. • If the appliance does not work correctly after having carried out all the checks, contact your local Authorised Service Centre.