Advertisement

Quick Links

Notice d'utili‐
Benutzerin‐
User Manual
sation
formation
Table de
Hob
Kochfeld
cuisson
SI1F7955B

Advertisement

Table of Contents
loading

Summary of Contents for Smeg SI1F7955B

  • Page 1 Notice d'utili‐ Benutzerin‐ User Manual sation formation Table de Kochfeld cuisson SI1F7955B...
  • Page 2: Table Of Contents

    CONTENTS Safety information Care and cleaning Safety instructions Troubleshooting Product description Installation Daily use Technical data Flexible induction cooking area Energy efficiency Hints and tips Subject to change without notice. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions.
  • Page 3 General Safety WARNING: The appliance and its accessible parts • become hot during use. Care should be taken to avoid touching heating elements. Do not operate the appliance by means of an external • timer or separate remote-control system. WARNING: Unattended cooking on a hob with fat or oil •...
  • Page 4: Safety Instructions

    SAFETY INSTRUCTIONS Installation • Before carrying out any operation make sure that the appliance is disconnected WARNING! Only a qualified from the power supply. person must install this • Make sure that the parameters on the appliance. rating plate are compatible with the electrical ratings of the mains power WARNING! Risk of injury or supply.
  • Page 5 disconnect the appliance from the • Used oil, that can contain food mains at all poles. The isolation device remnants, can cause fire at a lower must have a contact opening width of temperature than oil used for the first minimum 3 mm.
  • Page 6: Product Description

    Service • Contact your municipal authority for information on how to discard the • To repair the appliance contact an appliance correctly. Authorised Service Centre. • Disconnect the appliance from the • Use original spare parts only. mains supply. • Cut off the mains electrical cable close Disposal to the appliance and dispose of it.
  • Page 7 Sensor Function Comment field Flexi4Zone To switch between three modes of the func‐ tion. Heat setting display To show the heat setting. Timer indicators of To show for which zone you set the time. cooking zones Timer display To show the time in minutes. Auto-Vent To activate and deactivate the manual mode of the function.
  • Page 8: Daily Use

    Eco-Heat (3 step Residual heat The induction cooking zones produce the indicator) heat necessary for the cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the WARNING! There cookware. is a risk of burns from residual heat.
  • Page 9 Accelerator When the indicator of the cooking zone starts to flash slowly the time counts Activate this function to get a desired heat down. setting in a shorter time. When it is on, the To see the remaining time: set the zone operates on the highest setting in the cooking zone with .
  • Page 10 cooking zones do not operate. The heat for 4 seconds. comes on. setting display shows Deactivate the hob with To activate the function: touch To deactivate the function: activate the Touch of the timer to set the time. hob with .
  • Page 11 connected to a single phase exceeds Automatic modes 3700 W. • The function decreases the power to Auto‐ Boil‐ Fry‐ the other cooking zones connected to matic the same phase. light • The heat setting display of the reduced Mode zones changes between two levels.
  • Page 12: Flexible Induction Cooking Area

    and press again you will set fan speed When you finish cooking and to 0 which deactivates the hood fan. To deactivate the hob, the hood start the fan again with fan speed 1 touch fan may still operate for a certain period of time.
  • Page 13 Incorrect cookware position: 100-160mm Place the cookware with the bottom diameter larger then 160 mm centrally between two sections. Flexi4Zone big mode To activate the mode press until you see the correct mode indicator . This mode connects three rear sections into one cooking zone.
  • Page 14 Incorrect cookware position: Incorrect cookware position: Flexi4Zone max mode To activate the mode press until you see the correct mode indicator . This Flexi-Heat mode connects all sections into one cooking zone. To set the heat setting use This function allows you to adjust the any of the two control bars on the left side.
  • Page 15: Hints And Tips

    General information: • 160 mm is the minimum bottom You can change the heat settings for diameter of the cookware for this each position separately. The hob will function. remember your heat settings next time • Heat setting display for the left rear you activate the function.
  • Page 16 • water boils very quickly on a zone set cookware is made of different materials to the highest heat setting. (a sandwich construction). • a magnet pulls on to the bottom of the • humming: you use a high power level. cookware.
  • Page 17 Heat setting Use to: Time Hints (min) 5 - 7 Steam vegetables, fish, meat. 20 - Add a couple of tablespoons of liquid. 7 - 9 Steam potatoes. 20 - Use max. ¼ l of water for 750 g of potatoes. 7 - 9 Cook larger quantities of food, 60 -...
  • Page 18: Care And Cleaning

    CARE AND CLEANING Cleaning the hob WARNING! Refer to Safety chapters. • Remove immediately: melted plastic, plastic foil, sugar and food with sugar, General information otherwise, the dirt can cause damage to the hob. Take care to avoid burns. • Clean the hob after each use. Use a special hob scraper on the glass •...
  • Page 19 Problem Possible cause Remedy There is water or fat stains Clean the control panel. on the control panel. An acoustic signal sounds You put something on one Remove the object from the and the hob deactivates. or more sensor fields. sensor fields.
  • Page 20 Problem Possible cause Remedy The diameter of the bottom Use cookware with a diame‐ of the cookware is incorrect ter applicable to the activa‐ for the activated function or ted function or function function mode. mode. Use cookware with a diameter smaller than 160 mm on a single section of the flexible induction cook‐...
  • Page 21: Installation

    If you cannot find a solution... error message that comes on. Make sure, you operated the hob correctly. If not the If you cannot find a solution to the problem servicing by a service technician or dealer yourself, contact your dealer or an will not be free of charge, also during the Authorised Service Centre.
  • Page 22: Technical Data

    You can instal a separation panel but it is not mandatory. TECHNICAL DATA Rating plate Model SI1F7955B PNC 949 594 445 00 Typ 62 E5A 05 AA 400 V 3N 50 - 60 Hz Induction 11.0 kW Made in Germany Ser.Nr.
  • Page 23: Energy Efficiency

    It changes with the material and dimensions of the cookware. ENERGY EFFICIENCY Product information according to EU 66/2014 Model identification SI1F7955B Type of hob Built-In Hob Number of cooking zones Number of cooking areas Heating technology Induction Diameter of circular cook‐...
  • Page 24 EN 60350-2 - Household electric cooking • If it is possible, always put the lids on appliances - Part 2: Hobs - Methods for the cookware. measuring performance • Before you activate the cooking zone put the cookware on it. Energy saving •...
  • Page 25 867346323-C-152018...

Table of Contents