Operation
Changing the Paper Thickness Mode
To avoid the double feeding or jams, you can set the paper thickness mode according to the document type.
Press the paper thickness key to select the desired mode.
You can select the following modes:
Paper Thickness
Thin
20–50 g/m²
(5–13 lbs.)
Normal
50–157 g/m²
(13–42 lbs.)
Thick
157–209 g/m²
(42–56 lbs.)
Auto
20–157 g/m²
(5–42 lbs.)
*1
indicates a lit indicator.
24
Operating Manual
Indicator
*1
When scanning thin paper or paper with a rough surface, such
as NCR paper
When scanning normal paper, such as copier paper
When scanning thick paper or paper with a smooth surface,
such as card stock
When scanning a document mixing of paper thickness
The scanning speed may slightly slow.
When to use