3.
Remove dirt on the sensors with the included blower ( 1 ), then wipe the image sensor covers with the
roller cleaning paper (page 48).
How to clean the sensors and reflectors
Remove the brush from the blower ( 1 ), place it on the holes for the sensors and reflectors ( 2 ), as well
as the conveyor indentations ( 2 ), and blow off dirt, as shown in the illustration below.
2
Location of Sensors
7
10
1
4
3
4
6
9
8
Waiting sensor
3
Skew sensors
4
Double feed detectors
5
(For the KV-S4065CL /
KV-S4065CW, there is only 1 double
feed detector in the center.)
Starting sensor
6
Image sensor cover (F)
7
5
Double feed detectors
8
(For the KV-S4065CL /
KV-S4065CW, there is only 1 double
feed detector in the center.)
Paper sensor
9
Image sensor cover (B)
10
Care and Maintenance
Operating Manual
55