Restoring Factory Settings In Computer Setup; Updating The Bios; Determining The Bios Version - HP Pro Tablet 608 G1 User Manual

Restoring factory settings in Computer Setup

NOTE: Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1. Shut down the tablet.
2. To power on the tablet, press the power and volume down buttons simultaneously.
The Startup menu is displayed.
3. Tap F10 BIOS Setup to enter Computer Setup.
4. Select Main, and then tap Restore Defaults.
5. Follow the on-screen instructions.
6. Make the selections to save your changes and exit.
Your changes go into effect when the tablet restarts.
NOTE: Your password settings and security settings are not changed when you restore the factory
settings.

Updating the BIOS

Updated versions of the BIOS may be available on the HP website.
Most BIOS updates on the HP website are packaged in compressed files called
Some download packages contain a file named Readme.txt, which contains information regarding
installing and troubleshooting the file.

Determining the BIOS version

To determine whether available BIOS updates contain later BIOS versions than those currently
installed on the tablet, you need to know the version of the system BIOS currently installed.
BIOS version information (also known as
Start screen by selecting the HP Support Assistant app, selecting My computer, and then selecting
System Information, or by using Setup Utility (BIOS).
1. Shut down the tablet.
2. To power on the tablet, press the power and volume down buttons simultaneously.
The Startup menu is displayed.
3. Tap F10 BIOS Setup to enter Computer Setup.
4. Select Main, select System Information, and then make note of your BIOS version.
5. Make the selections to exit without saving your changes.
ROM date and System BIOS ) can be revealed from the
Restoring factory settings in Computer Setup
SoftPaqs .
33