Others - Nikon Forestry Pro Instruction Manual

Operation and internal display
En 【8】 Three-point measurement (height between two points) mode
De
Operation/Results
Fr
Es
8
It
Seeking your target
8-1 Horizontal distance (1st target)
Ru (Align the reticle with target)
No
8-2 (Laser irradiate symbol is
Se displayed.)
Follow by 8-1
Fi
8-3 Failure to measure Repeat 8-1, 8-2, 8-3 until measurement is
complete.
Nl
Horizontal distance
Dk 8-4
Followed by 8-5.
Ro
Aiming (2nd target)
Vertical separation
8-5 (Align the reticle with
(height from horizontal level to 2nd point).
Pl
target)
Hu
8-6 (Laser irradiate symbol is
Cz
displayed)
Vertical separation
8-7
(height from horizontal level to 2nd point).
Aiming (3rd target)
Vertical separation
8-8 (Align the reticle with
(height between 2nd target and 3rd target)
target)
8-9 (Laser irradiate symbol is
displayed)
Vertical separation
8-10 (height between 2nd target and 3rd target)
After 2 seconds, follow by 8-1
Regardless of process, after 30 seconds since
9 Power off
your last operation, power turns off.
28
Display examples
Button Display meter yards feet
Elevation (˚) Depression (˚)
blinks
blinks
blinks
blinks
30 seconds
without
operation

Others

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
The Forestry Pro is a simplified laser rangefinder. Results obtained should not be used for official records.
En
De
Fr
Es
It
Ru
No
Se
Fi
Nl
Dk
Ro
Pl
Hu
Cz
29