Display - Denon AVR-1712 Owner's Manual

Display

q
Decoder indicators
These light when the respective decoders are operating.
w
Input signal indicators
e
Information display
The input source name, surround mode, setting values and other
information are displayed here.
r
Front speaker indicator
This lights according to the setting of the front A and B speakers.
t
Multi-zone indicators
This lights up when ZONE2 (separate room) power is turned on
(vpage 45).
y
Master volume indicator
u
Sleep timer indicator
This lights when the sleep mode is selected (vpage 42, 46).
i
MUTE indicator
This lights when the mute mode is selected (vpage 21).
Q4 Q3
q w
Audyssey ® indicators
o
Light up as follows, depending on the setting of "MultEQ ® XT",
55), "Dynamic EQ ® "
(vpage
Volume ® " (vpage 56).
When "MultEQ ® XT", "Dynamic EQ ® " and
"Dynamic Volume ® " are "ON".
When "MultEQ ® XT" and "Dynamic EQ ® " are
"ON" and "Dynamic Volume ® " is "OFF".
When "MultEQ ® XT" is "ON" and "Dynamic EQ ® "
and "Dynamic Volume ® " are "OFF".
Q0
Surround back indicator
This lights when audio signals are being output from the surround
back speakers (vpage 60).
Q1
Input mode indicators
Set the audio input modes for the different input sources
(vpage 72).
Q2 Q1 Q0 o i u
e r t
Q2
RESTORER indicator
This lights when the RESTORER mode is selected (vpage 57).
(vpage 56) and "Dynamic
Q3
HDMI indicator
This lights when playing using HDMI connections.
Q4
Tuner reception mode indicators
These light according to the reception conditions when the input
source is set to "TUNER".
STEREO : In the FM mode, this lights up when receiving stereo
broadcasts.
TUNED : Lights up when the broadcast is properly tuned in.
AUTO : Lights up when in the auto tuning mode.
82
y