Playback In Zone2 (Separate Room); Audio Output; Playback - Denon AVR-1712 Owner's Manual

Playback in ZONE2 (Separate room)

• You can operate this unit so as to enjoy audio in a room (ZONE2)
other than the MAIN ZONE (room where the unit is located).
• You can simultaneously play back the same source in both the MAIN
ZONE, ZONE2. You can also play back separate sources in the MAIN
ZONE and ZONE2.

Audio output

Zone playback by speaker output
The ZONE2 audio signals are output from this unit's SURR.BACK/AMP
ASSIGN speaker terminals using the amplifier assignment function.
n Connecting and setting the speakers
"Amp Assign" setting
(vpage 60) and audio Connecting the speakers
signals output
Output signal :
ZONE2
Stereo (L / R)
We recommend using high quality pin-plug cables for audio
connections in order to prevent noise.
NOTE
It is not possible to play the digital audio signals input from the HDMI,
COAXIAL or OPTICAL connectors in ZONE2.
BD

Playback

1
Press ZONE SELECT
K
zone mode to
2
AMP
Press to set the remote
control unit to AMP-operation
mode.
3
ZONE/DEVICE Z
Press
the ZONE2 power.
The indicator on the display lights.
• Also press input source select button when
in standby mode, the power turns on.
ZONE/DEVICE X
• When
turns off.
• Power in ZONE2 can be turned on or off by
ZONE2
ZONE2 ON/OFF
pressing
4
Press the input source select
(L) (R)
button.
w q w q
The audio signal of the selected source
is output to ZONE2.
• To perform an operation with the main unit, press
many times.
When power for both MAIN ZONE and ZONE2 is set to ON, power of
the MAIN ZONE only can be turned off. Select
ZONE/DEVICE X
step 1 then press
to switch the
(ZONE2).
to turn on
Input source
select buttons
is pressed, ZONE2
on the main unit.
ZONE2 SELECT
J
(MAIN ZONE) in
.
45
Adjusting the volume
M df
Use to adjust the volume.
GAdjustable rangeH – – – –80dB – –40dB – 18dB
(When the "Volume Display" (vpage 65) setting is "Relative")
GAdjustable rangeH 0 – 41 – 99
(When the "Volume Display" (vpage 65) setting is "Absolute")
• At time of purchase, "Volume Limit" (vpage
"–10dB (71)".
MASTER VOLUME ZONE2 SELECT
Turn after pressing
unit to adjust the sound volume.
Turning off the sound temporarily
N
Press .
The sound is reduced to the level set at "Mute Level" (vpage 65)
in the menu.
• To cancel, either adjust the volume or press
• The setting is canceled when the zone's power is turned off.
65) is set to
on the main
N
again.
vSee overleaf