Specifications - Denon AVR-1712 Owner's Manual

Specifications

n Audio section
• Power amplifier
Rated output: Front:
90 W + 90 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Center:
90 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Surround:
90 W + 90 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Surround back:
90 W + 90 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
6 – 16 Ω
Output connectors:
• Analog
200 mV/47 kΩ
Input sensitivity/Input impedance:
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N: 100 dB (IHF–A weighted, DIRECT mode)
n Video section
• Standard video connectors
Input/output level and impedance: 1 Vp-p, 75 Ω
5 Hz – 10 MHz — 0, –3 dB
Frequency response:
• Color component video connector
Input/output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω
P / C
B
P / C
R
Frequency response: 5 Hz – 60 MHz — 0, –3 dB
signal — 0.7 Vp-p, 75 Ω
B
signal — 0.7 Vp-p, 75 Ω
R
n Tuner section
(Note: μV at 75 Ω, 0 dBf = 1 x 10
Receiving Range: 87.5 MHz – 107.9 MHz
Usable Sensitivity: 1.2 μV (12.8 dBf)
50 dB Quieting Sensitivity: MONO
S/N: MONO
STEREO 67 dB (IHF–A weighted, DIRECT mode)
MONO
Total harmonic Distortion (at 1 kHz):
STEREO 1.0 %
n General
Power supply: AC 120 V, 60 Hz
Power consumption: 460 W
0.1 W (Standby)
3 W (CEC standby)
For purposes of improvement, specifications and design are subject to change without notice.
97
[FM] [AM]
–15 W)
520 kHz – 1710 kHz
18 μV
2.8 μV (20.2 dBf)
70 dB (IHF–A weighted, DIRECT mode)
0.7 %