Temperature Alarm Settings - Clas Ohlson ws2370 User Manual

Temperature alarm settings

You can decide that the alarm should note when a certain temperature is
reached. You can set two alarm simultaneously, one for the receiver and
one for a sensor.
Insidoor temperature alarm
1. Scroll to inside temperature alarm mode by using MODE.
. The default value 14˚C or existing
preset will flash.
3. Press HOUR or MINUTE key to set the
temperature limit value.
4. Press SNOOZE/ALARM/C/F key con-
tinuously to scroll and select the high
temperature alarm ( ), low temperature
alarm ( ) or disable the alarm function
(blank).
5. Press MODE to finish.
Outdoor temperature alarm
1. Scroll to outside temperature alarm mode by using MODE.
. Press CHANNEL to select one desired channel of transmitter.
3. The default value 14˚C or existing
preset will flash.
4. Press HOUR or MINUTE key to set
the temperature limit value.
5. Press SNOOZE/ALARM/C/F key con-
tinuously to scroll and select the high
temperature alarm ( ), low tempe-
rature alarm ( ) or disable the alarm
function (blank).
6. Press MODE to finish.
When temperature alarm sounds
- Press ANY key to stop temperature alarm. If no key is pressed, the
temperature alarm will automatically stop itself after one minute.
- Once triggered, temperature alarm comes on as a distinctive sound,
different to Alarm 1 and Alarm .
1 5
3
1 5
4
3
2
4
1 6
2 4
2
1 6
5
4
2
2
5
2
9