Trobleshooting; Care And Maintenance - Clas Ohlson ws2370 User Manual

Trobleshooting

Problem
The temperature meas-
urement of remote sen-
sor and receiver does
not match.
Temperature reading of
outdoor remote sensor
seems to high.
Receiver is no longer
receiving remote sen-
sor signals or display
Operation is not normal
or certain functions do
not work.

Care and maintenance

Clean with a soft moist cloth. Never use cleaning agents or strong solvents.
Disposal
Follow local regulations when disposing of this product. If you are uncertain,
contact your municipality.
Solution
Wait for about 1- minutes to ensure the remote
sensor and receiver are in phase. Otherwise,
re-synchronize the receiver by holding Channel
for 3 seconds until a beep is heard.
ensure the remote sensor is out of direct sun-
light, and away from sources of heat.
- Repeat the learning procedures.
- Temperature may be below -30˚C.
- Batteries in remote sensor may need to be
replaced.
- Move remote sensor closer to the receiver.
- Make sure remote sensor is away from
sources of electrical disturbance.
Device requires reset. Reset the device by re-
placing new batteries in both transmitters and
receiver.
1