Backlight Illumination
This Weather Station is equipped with Backlight function. Pressing any key
will turn on the backlight function. To save energy, you can select to Turn On
/ Off the backlight by executing the following steps:
1. Press and hold MODE for 3 seconds to enter Clock setting mode
. Press again MODE to enter Date setting mode.
3. Press SNOOZE/ALARM/C/F key to activate/
deactivate the backlight.
4. Press MODE to finish.
Replacing batteries
In case the batteries are exposed to very high or low temperatures for a long
time the batteries can lose effect, which decreases the range between sen-
sor and receiver.
Receiver
1. If the low battery symbol (
weather data display section, then the receiver batteries have run dry.
However, it will direct drop down its performance, for example:
a. the LCD display is faint.
b. may cause the transmission range to be limited.
c. lost of the data from remote transmitter(s).
. You will need x AA batteries for the
receiver. Changing the batteries in the
base station will cause all settings to
be erased.
Transmitter
3. If the low battery symbol (
played in LCD display of transmitter,
then the remote transmitter batteries
have run dry.
4. The low battery symbol (
Outside weather data display section.
5. You will need x AA batteries for the transmitter. Changing the batteries
in the remote transmitter will set up again
1
4
) is displayed below the Trend box at Inside
1
4
) is dis-
) will also indicate below the Trend box at
11
1
2
3
1
2
3