1 – Introduction; 2 – Connections; 3 – Settings - Prodipe MS4C User Manual

1 – Introduction
Thank you for choosing this PRODIPE product.
Safety Information
To ensure both your safety and the proper functioning of this product, please take
the time to read the safety instructions on the back cover.
WARNING. To avoid any possibility of electric shock, please do not remove the
back panel of this product. For any repair work please contact either the shop
where you purchased the product or a qualified technician.
Please note that when the volume is turned up high, this equipment can produce
sound levels which may irreparably damage your hearing.
2 – Connections
To ensure that your studio monitors are properly connected, please adhere to the following
steps:
1. Check your audio lead.
2. Switch on the equipment you intend to use with the speakers (console, PC, audio
equipment, etc.).
3. Check the speaker settings and your audio equipment (volume turned down to its
lowest level).
4. Turn the Prodipe speakers POWER switch to ON - the LED should light up.
Note that: when powering off, the Prodipe speakers should be switched off first (switch to
OFF and LED goes out).
3 – Settings
VOLUME
The gain can be adjusted using the switch at the rear of the speaker (see Figure 1).
It can be set between -30dB and +6dB.
Actual product(s) may differ from illustrations/photographs used
Figure 1
Copyright © 2012 IPE Music
-1-