Safety Information Thank you for purchasing this digital appliance. To ensure perfect operation and security, please read the manual carefully and retain it for future reference. Precautions The lightning flash with the arrowhead symbol in an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage”...
Page 4
, turn the Prodipe speaker POWER switch to ON - the blue LED should light up. Note that: when powering off, the Prodipe speakers should be switched off first (switch to OFF and blue LED goes out). Important: the choice of voltage via the AC SELECT switch depends on your power supply.
Page 5
3 - Settings Various settings are available for your Pro8-3W speakers: VOLUME The gain can be adjusted using the VOLUME control switch on the rear panel (see Erreur ! Source du renvoi introuvable.). It can be set between -30dB and +6dB.
Page 6
The XLR and TRS sockets are balanced; the RCA is unbalanced. Figure 5 – TRS, XLR, RCA inputs 5 – Speaker Orientation These Prodipe studio monitors can be placed upright or prone. Optimum listening height Figure 6 Speaker Orientation for Stereo Listening...
6 - Specifications • Active 3-Way Studio Monitors. • 8” Woofer with magnetic shielding and fibre cone. • 4” Mid Driver with magnetic shielding and fibre cone. • 1” Tweeter with magnetic shielding and fibre cone. • Power Ratio: 90W Woofer, 40W Mid, 20W Tweeter. •...
Need help?
Do you have a question about the Pro8-3W and is the answer not in the manual?
Questions and answers