Introduction; Connections - Prodipe Pro8-3W User Manual

1 – Introduction
Thank you for choosing this PRODIPE product.
Safety Information
To ensure both your safety and the proper functioning of this product, please take
the time to read the safety instructions on the back cover.
WARNING. To avoid any possibility of electric shock, please do not remove the
back panel of this product. For any repair work please contact either the shop
where you purchased the product or a qualified technician.
Please note that when the volume is turned up high, this equipment can produce
sound levels which may irreparably damage your hearing.
2 – Connections
To ensure that your studio monitors are properly connected, please adhere to the following
steps:
1. Check your audio lead.
2. Switch on the equipment you intend to use with the speakers (console, PC, audio
equipment, etc.).
3. Check the speaker settings and your audio equipment (volume turned down to its
lowest level).
4. Check the voltage
should light up.
Note that: when powering off, the Prodipe speakers should be switched off first (switch
to OFF and blue LED
Important: the choice of voltage via the AC SELECT switch
supply. Any change to the voltage should be carried out when the speakers are off (switch
to OFF and speakers unplugged from the power supply).
, turn the Prodipe speaker POWER switch
goes out).
POWER SUPPLY
AC SELECT
FUSE
Figure 1
Illustrations et photos non contractuelles
Copyright © 2012 IPE Music
depends on your power
PRO8-3W
110V – 120V 220V – 240V
115V 230V
T2AL T1AL
to ON - the blue LED
- 4-