Related Manuals for Rayburn 480CD
Summary of Contents for Rayburn 480CD
- Page 1 Users Instructions Rayburn 480CD For use in GB and IE DESN 514712 PLEASE READ THESE INSTRUCTIONS BEFORE USING THIS APPLIANCE raywarranty@aga-web.co.uk 12/15 EOPI 514711...
-
Page 2: Table Of Contents
Contents SECTION PAGE INTRODUCTION USER INFORMATION CONTROLS THE COOKER COOKING HINTS THE BOILER THE PROGRAMMER 7 - 9 CLEANING AND CARING FOR YOUR COOKER BURNER RE-SET GAS LEAK OR FAULT POWER FAILURE SERVICING NOTE: SMOKE/SMELL EMITTED DURING INITIAL USAGE Some parts of the cooker have been coated with a light covering of protective oil. During initial operation of the cooker, this may cause smoke/smell to be emitted and is normal and not a fault with the appliance, it is therefore advisable to open doors and or windows to allow for ventilation. -
Page 3: Introduction
INTRODUCTION Thank you for buying a Rayburn appliance. To get the best from it, please read this leaflet and abide by the warnings, carefully follow the instructions before using your Rayburn for the first time. Consumer Protection As responsible manufacturers we take care to make sure that our products are designed and constructed to meet the required safety standards when properly installed and used. -
Page 4: Controls
CONTROLS APPROX MARK TEMP 120°C 140°C 150°C 160°C 180°C 190°C 200°C 220°C 230°C 240°C HIGH 250°C Fig. 1 DESN 514713... -
Page 5: The Cooker
The main oven and hotplate temperatures are controlled by THE RAYBURN COOKBOOK the cooker thermostat control knob which is situated behind The cook book supplied with the Rayburn cooker is generic the controls door. See section ‘CONTROLS’. to all Rayburns. When following the recipes consult these... -
Page 6: Cooking Hints
Cast iron retains the heat well so that cake or soufflé can be observed during cooking. As the meat tin supplied with the Rayburn fits directly on to the runners the grid shelves are left free for other dishes. For safety reasons, the grid shelves are non-tilt, use as directed in section ‘USER... -
Page 7: The Boiler
PLEASE NOTE: Hold + and - down to increase or decrease. WHAT IT DOES The Rayburn programmer is a 7-day 2 event programmer AUTO/MANUAL CONTROL which allows the user to set 2 periods of the day in which the cooker will turn on and then off. A typical example of how this may be used is ‘on’... - Page 8 1. The display should alternate between ON2 and the SETTING THE PROGRAMMER - WEEKLY (1) time of day currently set. 2. Adjust using + or - to set the time the second event is to begin (evening). 3. Press SET once to confirm. 4.
- Page 9 SETTING THE PROGRAMMER - DAILY Fig. 9 DESN 514721 1. To set individual days, press SET once. 2. Adjust to the day required using + or - buttons. 3. Press SET to confirm the day chosen. 4. Adjust to the new times required as before. 5.
-
Page 10: Cleaning And Caring For Your Cooker
Insulating Lids Polished Stainless Wipe over with a soapy damp cloth followed by a polish with a clean dry cloth. Use a Rayburn Steel Chrome and Stainless Steel Cleaner. -
Page 11: Burner Re-Set
BURNER RE-SET If a fault occurs on either burner then a fault code is displayed and shuts down the part of the appliance with a fault (cooker or boiler). This can be re-set after 1 minute, by pressing the REPEAT button. In the event of repeated failure switch off the gas and electrical supply to the appliance and contact the installer/service engineer. - Page 12 With AGA Rangemaster’s policy of continuous product improvement, the Company reserves the right to change specifications and make modifications to the appliance described at any time. Manufactured by AGA Rangemaster Station Road Ketley Telford Shropshire TF1 5AQ England Tel. No.: 0845 8152020 www.rayburn-web.co.uk www.agaliving.com...