Rayburn 300W Installation Instructions Manual

Rayburn 300W Installation Instructions Manual

Wood burning cooker
Hide thumbs Also See for 300W:

Advertisement

BS EN 12815
Consumer Protection Act 1987
As responsible manufacturers, we take care to make sure that our
products are designed and constructed to meet the required safety
standards when properly installed and used.
IMPORTANT NOTICE: PLEASE READ THE ACCOMPANYING
WARRANTY: Any alteration that is not approved by AGA could
invalidate the approval of the appliance, operation of the warranty
and could also affect your statutory rights.
All local regulations including those referring to national and
European standards need to be complied with when installing
the appliance.
Control of Substances - Health and Safety
Important
This appliance may contain some of the materials that are indicated.
It is the Users/Installers responsibility to ensure that the necessary
personal protective clothing is worn when handling, where
PERFORMANCE
REMEMBER: when replacing a part on this appliance, use only spare parts that you can be assured conform to the safety and
performance specification that we require. Do not use reconditioned or copy parts that have not been clearly authorised by AGA.
Total weight of appliance - 380 Kg.
The Rayburn 300W is a cooker and roomheater.
Fuel
Wood Logs
raywarranty@aga-web.co.uk
Installation Instructions.
Rayburn 300W
Wood Burning Cooker
applicable, the pertinent parts that contain any of the listed materials
that could be interpreted as being injurious to health and safety, see
below for information.
Firebricks, Fuel beds, Fuels - when handling use disposable
gloves.
Fire Cement - when handling use disposable gloves.
Glues and Sealants - exercise caution - if these are still in liquid
form use face mask and disposable gloves.
Glass Yarn, Mineral Wool, Insulation Pads, Ceramic Fibre,
Kerosene Oil - may be harmful if inhaled, may be irritating to skin,
eyes, nose and throat. When handling avoid inhaling and contact
with skin or eyes. Use disposable gloves, face-masks and eye
protection. After handling wash hands and other exposed parts.
When disposing of the product, reduce dust with water spray,
ensure that parts are securely wrapped.
THE ASHPIT AND FIREBOX DOORS MUST BE LOCKED
CLOSED AT ALL TIMES DURING NORMAL USE, EXCEPT
Total (kW)
To Space (kW)
5.3
5.3
WARNING
WHEN LIGHTING OR RE-FUELLING.
Flue Gas Mass Flow (g/s)
7.8
DESN 515188
04/14 EINS 515184

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 300W and is the answer not in the manual?

Questions and answers

Summary of Contents for Rayburn 300W

  • Page 1 REMEMBER: when replacing a part on this appliance, use only spare parts that you can be assured conform to the safety and performance specification that we require. Do not use reconditioned or copy parts that have not been clearly authorised by AGA. Total weight of appliance - 380 Kg. The Rayburn 300W is a cooker and roomheater. Fuel Total (kW)
  • Page 2: Preparation Of Site

    Fig.1 DESN 515189 A When using this appliance all grate plates must be installed in BUILDERS OPENING the grate. THIS APPLIANCE IS NOT SUITABLE FOR BURNING SOLID MINERAL FUELS OR BITUMINOUS COAL. This appliance has been tested using wood logs only. The fireplace recess should comply with current building regulations, and have an opening of 1,080mm wide minimum, Grate riddling is not required under normal burning conditions...
  • Page 3: Cooker Flue Connection

    Factory made Insulated Chimneys It is recommended the chimney be ceramic lined and comply with BS. 4543. The minimum diameter for a straight chimney is 175mm and if offsets are fitted the recommended minimum diameter is 200mm. IN ALL TYPES OF CHIMNEYS THE MINIMUM HEIGHT FOR CORRECT OPERATION OF THE COOKER IS 4.5m AND SHOULD TERMINATE ABOVE THE ROOF IN ACCORDANCE WITH REGIONAL STATUTORY REQUIREMENTS.
  • Page 4 pipe position that will not inconvenience appliance operation or FLUE LAYOUTS maintenance. GRATE RESTRICTION PLATES In Fig. 2. the cooker is installed in an existing recess. There must be a clearance of not less than 150mm between the top of the flue pipe and any overhanging brickwork.
  • Page 5: Testing And Commissioning

    The handrail brackets are held on the front ends of the cooker top-plate casting. Remove the travel nuts and replace with the handrail brackets ensuring the fibre protecting washers are in position. Insert the handrail with fitted endcaps into the brackets, positioning them correctly, and tighten the locating bolts (Fig.
  • Page 8 With AGA Rangemaster’s policy of continuous product improvement, the Company reserves the right to change specifications and make modifications to the appliance described at any time. Manufactured by AGA Rangemaster Station Road Ketley Telford Shropshire TF1 5AQ England www.rayburn-web.co.uk www.agacookshop.co.uk...

Table of Contents