Roland Advanced Jet AJ-1000i Setup Manual page 30

5. Installing the Ink Cartridges

TEMP. UNIT
C

NOW PROCESSING..
SELECT INK TYPE
EXt i LcLm
2.
Remove the covers, then remove the film that protects the heads from drying out.

SELECT INK TYPE
EXt i LcLm
INSTALL
DRAIN BOTTLE


FILLING INK...
>>

REMOVE FILM

Right side cover

28
C
Approx. 30 seconds
Tube
Funnel
FROM CAP
Screws
Maintenance
cover
Screws
Use
ment you want (for temperature).
Press .
Wait for a screen like the one shown in the
figure to appear.
Use
Press .
The screen shown in the figure appears.
Make sure the drain bottle is installed.
Make sure the tube is inserted far enough that it touches
the funnel.
Drain bottle
Press .
The screen shown in the figure appears.
Preparations are complete when this screen
appears.
Remove the right side cover.
Remove the maintenance cover.
to select the unit of measure-
to select the ink type.