Vivax ACP-09CH25GEEI User Manual page 217

Operation of Remote Controller
9
TIMER ON :
Press this button to initiate the auto-ON timer. To cancel the auto-timer program, simply
press this button again.
After press of this button,
setting. Within 5 seconds, press + or - button to adjust the time value. Every press of either
button changes the time setting by 1 minute. Holding down either button rapidly changes the
time setting by 1 minute and then 10 minutes. Within 5 Seconds after setting, press TIMER
ON button to confirm.
10
SLEEP:
Press this button to go into the SLEEP operation mode. Press it again to cancel this
function. This function is available in COOL, HEAT (Only for models with heating
function) to maintain the most comfortable temperature for you.
11
TEMP:
Press this button, you can see indoor set temperature, indoor ambient temperature
on indoor unit's display. The setting on remote controller is selected circularly as below:
When selecting "
unit displays set temperature; When selecting
indicator on indoor unit displays indoor ambient temperature;
receives other remote control signal that will return to display the setting temperature.
Caution:
•
This model hasn't outdoor ambient temperature display function. While remote controller
can operate "
• It's defaulted to display set temperature when turning on the unit.
•
Only for the models with temperature indicator on indoor unit.
TURBO:
12
Press this button to activate / deactivate the Turbo function which enables the unit to
reach the preset temperature in the shortest time. In COOL mode, the unit will blow strong
cooling air at super high fan speed. In HEAT mode, the unit will blow strong heating air
at super high fan speed.
X-FAN :
13
X-FAN function: in COOL or DRY mode, the icon
continue operation for 2 minutes in order to dry the indoor unit even though you have
turned off the unit. After energization, X-FAN OFF is defaulted. X-FAN is not available in
AUTO, FAN or HEAT mode.
function: turn on the display's light and press this button again to turn off the display's
light. If the light is turned on,
14 I FEEL:
Press this button to turn on I FEEL function. The unit automatically adjust temperature
according to the sensed temperature. Press this button again to cancel I FEEL function.
15 /
Press this button to achieve the on and off of healthy and scavenging functions in
operation status. Press this button for the first time to start scavenging function;
LCD displays"
functions simultaneously; LCD displays"
time to quit healthy and scavenging functions simultaneously. Press the button for the
fourth time to start healthy function; LCD display "
the operation above. (This function is applicable to partial of models)
disappears and "ON "blinks. 0 0:00 is displayed for ON time
no display
" with remote controller or no display, temperature indicator on indoor
"and indoor unit displays set temperature.
is displayed. If the light is turned off,
". Press the button for the second time to start healthy and scavenging
" " with remote controller, temperature
is displayed and the indoor fan will
" and " ". Press this button for the third
". Press this button again to repeat
-9-
3s later or within 3s it
disappears.