Operation of Remote Controller
MODE icon:
16
If MODE button is pressed,
current operation mode icon
(AUTO),
(DRY),
(FAN) or
only for heat pump models) will
show.
SLEEP icon:
17
is displayed by pressing
the SLEEP button. Press this
button again to clear the display.
LIGHT icon:
18
is displayed by pressing the
LIGHT button. Press LIGHT button
again to clear the display.
TEMP icon:
19
Pressing TEMP button,
(set temperature),
ambient temperature)
(outdoor ambient temperature)
and blank is displayed circularly.
NOTE: "
" function is applicable
to partial of models.
16
17 18 19 20
( COOL),
(HEAT
(indoor
Up & down swing icon:
20
is displayed when pressing
the
up & down swing
Press this button again to clear the
display.
LOCK icon:
21
is displayed by pressing "+"
and "-" buttons simultaneously. Press
them again to clear the display.
SET TIME display:
22
After pressing TIMER button, ON or
OFF will blink. This area will show
the set time.
DIGITAL display:
23
This area will show the set tempe-
rature. In SAVE mode,"SE" will be
displayed.
AIR icon:
24
is displayed when pressing the
AIR button. Press this button again
to clear the display.
NOTE: This function is applicable
to partial of models.
-6-
24
23
22
21
down button.