Fronius IG Plus 3.0-1 Operating Instructions Manual page 103

Menu Items in
IG-NR
the Setup
Setting the number (address) of the Fronius IG Plus unit in a setup com-
Menu
prising multiple Fronius IG Plus units linked together
(continued)
Unit
Setting range
Factory setting
Important
connecting several Fronius IG Plus into a data communication network
using the 'Fronius Com Card' and a Datalogger.
DAT
indicates status of data transmission, resets the Personal Display Card
and Interface Card
Unit
Setting range
Factory setting
TIME
setting of date and time
Unit
Display area
Factory setting
The menu item 'Time' is only supported when the Fronius Datalogger is
installed.
STATE
Status display of power stage sets; the last error that has occurred can
be displayed
Important
every morning and evening due to low solar irradiance. These status
messages are not the result of a fault.
VERSI
displays version number of the IG-Brain and the power stage sets
Unit
Setting range
Factory setting
-
01 - 99 (100. Fronius IG Plus = 00)
01
Allocate a different address to each Fronius IG Plus when
COM
-
Displays OK
-
DDMMYYYY, HH:MM
Date / Time
-
PS
State 306 (Power Low) and 307 (DC-Low) appear naturally
ON
-
MAIN
-
; PDCD
COM RST
/ LCD / PS (PS00, PS01, PS02)
CTRL
93
/ IFCD
RST