Table of Contents
Advertisement
1.
Put one end of the strap through the slot of
the heart rate monitor first.
2.
Wrap the heart rate monitor and strap
around your chest. Adjust the heart rate monitor
to be at the center of your chest.
3.
Adjust the strap to fit your chest and make it
tight enough to prevent dropping while you are
jogging.
4.
Put another end of the strap through the slot
of the heart rate monitor to finish the wearing.
5.
Remember to select "scan" to paring heart
rate monitor with your GB-580.
[MAIN MENU] > [CONFIGURATION] >
[ACCESSORIES] > [SENSORS] > [HEART
RATE ] > SCAN.
It will show HR instead of SCAN once paring was
finished.
Advertisement
Table of Contents
