Related Manuals for Globalsat GH-561 GPS TREK PRO
Summary of Contents for Globalsat GH-561 GPS TREK PRO
-
Page 1: Quick Start Guide
Outdoor GPS Device GH-561 GPS Trek Pro Quick Start Guide POWER / LIGHT TRACK BACK SCROLL MARK W.P. / ESC FIND WAYPOINT... -
Page 2: What Is Gps
GlobalSat www.globalsat.com.tw What is GPS? GPS stands for Global Positioning System. For 3D fix, we need at least four satellites. Normally the accuracy of GPS under open sky which means no tall building and clear sky is within 10 meters per second. - Page 3 Note!! Do not near fire or lay on magnetic source avoiding e-compass aging. Please fully charge before first use. Considering waterproof, no decompose by yourself. Please wipe USB connect inside before charging and plugging to prevent damage device. Symbol Explanations GPS status indicator None: No signal Solid: 3D fix...
- Page 4 Solid with 1 bar: 3D fix with poor signal Solid with 2 bar: 3D fix with good signal Solid with 3 bar: 3D fix with strong signal Battery capacity indication E-Compass status indicator - Blinking: E-Compass got magnetic interference or unstable, it needs to calibrate at this situation.
- Page 5 The display will show direction and remain distances and needed time to destination accordingly. Solid arrow means system is at 3D Blank arrow means system is GPS no fix and at e-compass navigation mode. When near to destination, system will advise you, if you want to stop during duration, press button, system will ask if you want to exit...
- Page 6 Hot Key for the Settings 1. On compass screen, press simultaneously 2. The setting information is including Compass Setting Setup Time Display Setting GPS Info Factory Reset About Press will go into selected page Press will exit Notice: You can set the time zone, check GPS receiving status at this page and set contrast of display, the most items are not necessary to change.
- Page 7 1. On compass screen, press simultaneously 2. Follow the instruction to calibrate X & Y axis first 3. Calibrated X & Y axis, continue to calibrate Z axis 3. When you finished X/Y/Z axis calibration, the display will show ‘’ Calibration OK’’. 4.
Need help?
Do you have a question about the GH-561 GPS TREK PRO and is the answer not in the manual?
Questions and answers