8
DISPOSAL OF PRODUCT AFTER TEH END OF ITS SERVICE LIFE
Product is made out of materials the waste of which does not have any hazardous properties.
The following main kinds of waste will be generated after the end of the product´s service life:
Steel exchanger, jacketing, feeders, bin
Heat insulation (ROTAFLEX, SIBRAL)
Ceramic grate, reflector and plates on door
Control unit with sensing and control elements
8.1 NATURAL PERSON
Shall perform disposal of the product as follows:
8.1.1
Steel waste shall be sold to the nearest scrap-yard.
8.1.2
Heat insulation and ceramic parts shall be disposed of as mixed municipal waste.
8.1.3
The control unit with sensing and control elements is subjeck to return collection.
Return collection takes place in seller´s plant, where was this product purchased or at the manufacturer of the
boiler. Return collection is free of charge.
In accordance with current requirements of environmental protection the electronic parts of the poduct does not
contain lead!
Still do not dispose el. equipment as a municipal waste!
8.2 LEGAL ENTITY
Shall perform disposal as per Act no. 185/2001 – Act on wastes as amended. Waste shall be sorted as per the
kind and category (see main kinds of waste) and handed over to an authorized entity for disposal.
Exception is represented by control with sensing and control elements is subject to return collection ehich is
directly performed by the seller´s plan where the product was bought or by the manufacturer of the boiler.
Return collection is free of charge.
In accordance with current requirements of environmental protection the electronic parts of the
poduct does not contain lead!
Automatic boiler for wood pellets
– waste code 170405, category O.
– waste code 170604, category O.
– waste code 170103, category O.
– waste code 200136, category O.
38