Boiler Body - Tetan KP 12S Service And Operation Manual

4.1 BOILER BODY, SCHEME OF THE PRODUCTS
AND DESCRIPTION OF THE MAIN PARTS

BOILER BODY

is made of top-quality steel metal sheets and pipes for boiler in form of a weldment. Its shape is adapted in such
a way so that combustion products are cooled down efficiently at individual levels of power output, which is,
moreover, assisted by a system of turbulators. The exchanger is shaped in such a way so that the exhaust pipes
of combustion products can be cleaned individually and efficiently.
Steel weldment
with heat exchanger
Pipe with inside thread M48x2
mm to install an electrical
heating unit (optional)
Thermowell for sensor
and thermostat
Emergency thermostat holder
Openig on top for cleaning
covered by a lid of the
boiler´s body
Inspection door
Picture No. 2 Boiler body
Automatic boiler for wood pellets
9
Heating water output water G 1½"
(inside thread)
Exhaust pipe  130, 150 or 160 mm
Backwater input water G 1½"
(inside thread)
Rear flanged hole
to install the burner system
Pipe G ½" to install filling valve
Flanged hole to install ash
removing system