Instalation Of The Ceramic Catalytic Reflector - Tetan KP 12S Service And Operation Manual

Automatic boiler for wood pellets

6.3 INSTALATION OF THE CERAMIC CATALYTIC REFLECTOR

The ceramic catalytic reflector is manufactured from highly heat-resistant material (1800°C). It has two functions:
- directs the flow of combustion products through the boiler body
- assists very efficiently to burn out carbon substances and thus to reduce considerably harmful substances in
combustion products.
The reflector is placed outside the combustion space during transport in order to prevent from any damage. The
shape of the reflector reminds a hollow semi cylinder with one face closed - see picture.
Picture No. 25 Ceramic reflektor
The reflector is installed into the boiler on the surface of the burner boiler with the stop on its rear side and
symmetrically to its centre line.
While in operation ceramic reflector has to touch the back part of isolation desk of the burner.
Note: If you do not keep it, there is a chance of burner damage or a Boiler!! Check regulary!!

30