Ceramic Parts - Tetan KP 12S Service And Operation Manual

Attachment to both adaptors must be tight.
Cleaning of KP62 burner provides removal of excessive ash or cinder volume from the burner when burning
lower quality fuel. The drive of the cleaning mechanism is works together with ash cleaning.
Note:
Use of alternate fuels requires change of the burner type and also change of boiler program setup.

Note:
The cleaning mechanism burner drive and its installation are depicted in chapter 4.7 – Cleaning system.


CERAMIC PARTS

These parts are an inseparable component of the combustion chamber of the boiler and
they have a major influence on the quality of burning.
4.4.1 Ceramic reflector – placed on the top of the burner
4.4.2 Ceramic secondary grate – placed in the boiler body above the burner heating chamber
4.4.3 Ceramic plate – placed above the door
4.4.4 Ceramic door jacketing– mounted on the door
Picture No. 8 Cer. reflektor KP 12, KP 22
Picture No. 10 Ceramic secondary grade
Picture No. 11 Ceramic shield
Automatic boiler for wood pellets
Picture No. 12 Ceramic door casing
17
Picture No. 9 Two-part cer. reflektor KP 62