Technical Base Data - Tetan KP 12S Service And Operation Manual

4.2.1.1 Technical base data

HZS521-G
Supply voltage
(Input voltage for the power transformer on the power board, input
voltage for the STB, phase for the phase angle, relays and Triac outputs)
Power supply fre- 45 - 65 Hz
quency
Total current consumption 200 mA + current consumption of the
Current
consumption of
supply (230 V AC)
Supply for Heater Lambda sensor: 200 mA
Loads connected over fuse F4 (3,15 AT):
690 W/ maximum 3 A
Screw: maximum 690W/ maximum 3 A
Loads connected over fuse F6 (10 AT):
X9 Turbine: maximum 2300 W/ maximum 10 A
Loads connected over fuse F7 (10 AT):
X8 Ignition: maximum 2300 W/ maximum 10 A
Loads connected over fuse F8 (10 AT):
X5 heat exchange cleaner: maximum 690 W/ maximum 3 A
X6 grate open: maximum 690 W/ maximum 3 A
X7 grate closed: maximum 690 W/ maximum 3 A
The power supply not switched over STB, L
F9 (10 AT):
X10 boiler circuit return flow pump: maximum 2300 W/ maximum 10 A
HZS532-1
Internal
electronics power
supply
Relay power
supply
Fuse
+24 V current
consumption
HZS533, HZS535
Internal
electronics power
supply
Relay power
supply
Fuse
HZS 533 maximum 15 mA (without relays) Maximum 40
+24V current
consumption
Automatic boiler for wood pellets
230 V AC +/- 10 %
connected loads (max. 16 A)
Power supply transformer
Supply for the power board and CPU electronics
The power supply is switched of STB, L-STB
Loads connected over fuse F5 (10 AT):
+24 V (from HZS 511), must be connected to the expansion
controller
230 VAC
10 A for relay outputs
HZS 532-1: maximum 60 mA (without relays) Maximum
120 mA (with relays) HZS 532-1 with 5 expansion modules,
maximum 350 mA
+24 V (from HZS 511), must be connected to the expansion
controller
230 VAC
5 A for relay outputs and/or 3 A for solar module
X11 primary fan: maximum
Loads connected over fuse
mA (with relays)
13
X14