Operating With The Multi Camera - Sony RM-LVR2 How To Use Manual

The shooting modes are as follows.
Movie mode: Shooting movies.
Photo mode: Shooting still images.
Interval photo recording mode: Shooting still images at regular intervals until you stop shooting.
Loop recording mode: When the memory card capacity decreases, the camera deletes older
memory and keeps recording.
Audio recording mode: Recording sound.
Hint
You can also switch the shooting mode via MENU items on the remote control. The procedure for
switching via MENU items is as follows.
Press the MENU button to select
or DOWN button to select the shooting mode and press the REC/ENTER button.
If you connect to a Lens-style Camera (QX series), press the UP or Down button to operate the camera
zoom in the Live-View display.
[13] How to use
Shooting
Shoot movies or still images and record sound.
Check the shooting mode before shooting.
There are shooting modes that cannot be set depending on the connected camera. Refer to the
instruction manual of the camera.
1. Press the REC/ENTER button of this unit to start shooting.
The REC/Wi-Fi lamp turns from blue to red.
2. To stop shooting, press the REC/ENTER button again.
The REC/Wi-Fi lamp turns from red to blue.
Note
You can shoot a still image by pressing the REC/ENTER button in photo mode.
The REC/Wi-Fi lamp does not turn to red.
[14] How to use
Operating with the multi camera control
Operate multiple cameras with the multi connection.
Shooting Shooting movies and still images
Shooting Shooting movies and still images
(Shooting mode) in the setting items. Press the UP button