Table of Contents
Advertisement
[52] How to use
On moisture condensation
If this unit is brought directly from a cold to a warm location, moisture may condense inside or outside
the unit. This moisture condensation may cause a malfunction to the unit.
If moisture condensation occurs
Turn off the unit and wait about 1 hour for the moisture to evaporate.
Note on moisture condensation
Moisture may condense when you bring the unit from a cold place into a warm place (or vice versa) or
when you use the unit in a humid place, as shown below.
When you bring the unit from a ski slope into a warm place
When you bring the unit from an air conditioned car or room into a hot place outside
When you use the unit after a squall or a shower
When you use the unit in a hot and humid place
How to avoid moisture condensation
When you bring the unit from a cold place into a warm place, put the unit in a plastic bag and seal it
tightly. Remove the bag when the air temperature inside the plastic bag has reached the ambient
temperature (after about 1 hour).
[53] How to use
On carrying
Do not sit down in a chair or other place with this unit in the back pocket of your trousers or skirt, as
this may cause malfunction or damage this unit.
[54] How to use
On operating temperatures
The camera is designed for use in temperatures between –10°C and +40°C (14°F and 104°F).
Shooting in extremely cold or hot places that exceed this range is not recommended.
The LCD screen and the cabinet may become warm during operation. This is not a malfunction.
[55] How to use
Others
Precautions
Others
Precautions
Others
Precautions
Others
Precautions
Advertisement
Table of Contents
