Sony RM-LVR2 How To Use Manual page 10

*1
Time required to charge a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer under certain
circumstances or conditions.
*2
Rapid charging is possible by using the USB charger AC-UD10 (sold separately). To connect to the charger, use the micro USB
cable (supplied).
Note
You can charge this unit even if it is not completely discharged. Also, even if this unit is not fully
charged, you can use the partial charge capacity of the battery pack as is.
When the power of this unit is on, it is supplied with power but not charged.
To maintain this unit's function, fully charge this unit at least once from six months to a year while
storing. Also, store it in a cool, dry place.
Hint
A remaining charge indicator appears on the upper right of the display panel.
The displayed remaining charge indicator may not be correct under certain circumstances.
It takes about 30 seconds until the correct remaining charge indicator appears.
If the battery pack runs out quickly even though the remaining charge indicator is high, fully charge
this unit again. The remaining charge indicator will then be displayed correctly. Note that it may not be
displayed correctly in the following situations:
This unit is used for a long time at high ambient temperature.
This unit is left fully charged.
This unit is used heavily.
Use the AC-UD10 AC adapter (sold separately) for charging if you do not have a computer.
[5] How to use Getting Started
Attaching a belt to this unit
Attach the belt to this unit.
1. Place this unit on the base plate and thread the belt through the belt loop of this unit as illustrated in
, and then attach it as illustrated in
You can adjust the belt length depending on the pasting position of
Attaching a belt to this unit
.
and