Sony RM-LVR2 How To Use Manual page 52

Hide thumbs Also See for RM-LVR2:
Table of Contents

Advertisement

5. Push the hook outwards and remove the battery pack.
Note
When removing the built-in battery pack of this unit, be careful of the following.
Remove the screws, etc. away from small children to prevent accidental swallowing.
Be careful not to injure your nails or fingers.
[66] Troubleshooting
Fi.
Cannot connect this unit and the camera via Wi-Fi.
If you cannot connect the camera to this unit properly, try the operation below.
Check the camera and this unit connection mode are set to the single connection mode. If not,
change the connection mode and connect again.
[67] Troubleshooting
Cannot turn on this unit.
Charge the battery pack sufficiently.
[68] Troubleshooting
The power of this unit turns off suddenly.
Charge the battery pack sufficiently.
If you have not used this unit for a prolonged period, the efficiency of the battery will be improved by
repeatedly charging and discharging it.
Troubleshooting
Troubleshooting
Troubleshooting
Cannot connect this unit and the camera via Wi-
Cannot turn on this unit.
The power of this unit turns off suddenly.

Advertisement

Table of Contents
loading

Table of Contents