Table of Contents
Advertisement
Wind noise reduction
This function automatically reduces wind noise when you record using the built-in microphone.
1. Press the MENU button.
The list of setting items is displayed.
2. Press the UP button or DOWN button to select
and press the REC/ENTER button.
3. Press the UP button or DOWN button to select
REC/ENTER button.
4. Press the UP button or DOWN button to select the following setting, then press the REC/ENTER
button.
: Does not reduce wind noise.
: Cuts low-range to reduce wind noise.
[28] How to use
Still image mode switching
You can select either single shooting or continuous shooting when shooting still images.
Single shooting and continuous shooting can only be set when shooting still images.
1. Press the MENU button.
The list of setting items is displayed.
2. Press the UP button or DOWN button to select
mode switching) and press the REC/ENTER button.
3. Press the UP button or DOWN button to select the following setting, then press the REC/ENTER
button.
A single shooting (Single shoot): Shoots a single still image.
High speed continuous shooting: Shoots continuously at the frame rate and duration
specified in the still image shooting interval setting.
Motion shot LE: Automatically creates one composite photo from the images that were shot
continuously at the frame rate and duration specified in the still image shooting interval setting.
Note
After shooting with the high speed continuous shooting mode or Motion Shot LE mode, there is a
Changing the Settings
(Movie settings) or
(Wind noise reduction), and press the
Shooting settings
(Still image settings) -
(Loop recording settings)
(Still image
Advertisement
Table of Contents
