Customizing Softkeys - Alcatel Temporis IP100 Administration And Provisioning Manual

Customizing Softkeys

For Temporis IP150, IP300, IP700G and Conference IP1850, configuration file
allows you to select which soft keys should appear on the Idle screen, Active Call screen,
Held Call screen and Live Dial screen. You can also specify the position of each soft key.
Some soft keys appear only under certain conditions. For example, the Line soft key on
the Idle screen appears only if there is more than one registered SIP account. When a
"conditional" soft key is not visible, the soft key's position is left empty.
Soft key levels with no soft keys will not be shown if there are multiple soft key levels (as
indicated by the  and  icons). Any soft key level where all soft keys are invisible will be
dynamically skipped when the user navigates through the available levels. On the
Temporis IP150, IP300 and IP1850, a soft key level consists of three soft keys (populated
or blank) in a row. On IP700G each level consists of four soft keys.
The table below shows the soft key options available for each screen. Each screen can
have a maximum of nine soft keys.
NOTE: You cannot edit Soft Key text. The configuration file parameters allow you to only
select and position the soft keys for each screen. Texts listed here correspond to English;
each language has its own soft key list. Should you need this list for a particular
language, please contact your support team.
Screen Available Soft Keys
Idle
Blank
Directory
Call Log
Redial
Messages
Do Not Disturb
Call Forward
Call Forward All
Call Forward No Answer
Call Forward Busy
Intercom
Retrieve Parked Call
Call Return
Group Call Pickup
Direct Call Pickup
Business IP Range Administration and Provisioning Guide
Soft Key Text
Directory
Call Log
Redial
Message
DND
CallFwd
FwdAll
CFNA
FwdBusy
Intercom
Retrieve
CallBack
GrpPickup
DirPickup
ed 1.0 38/175