Page_Zone" Module: Paging Zone Settings - Alcatel Temporis IP100 Administration And Provisioning Manual

"page_zone" Module: Paging Zone Settings

The paging zone settings allow you to define a maximum of 10 paging zones that the
deskset can use for multicast paging.
The paging zone parameters (except for page_zone.call_priority_threshold) follow the
format page_zone.x.[element], where x is the paging zone ID number, ranging from 1 to
10.
Setting
page_zone.x.name
page_zone.x.multicast_address
page_zone.x.multicast_port
page_zone.x.accept_incoming_page
page_zone.x.priority
page_zone.call_priority_threshold
Business IP Range Administration and Provisioning Guide
Description Range
Sets the paging Text string
zone name, which
appears on deskset
LCD for outgoing
and incoming
multicast pages. A
maximum of 15
characters is
allowed.
Enter the IPv4,
multicast IP 224.0.0.0 to
address that the 239.255.255.
deskset will 255
monitor. The range
of valid IP
addresses is.
Enter the 1-65535
multicast port
associated with
the multicast IP.
The range of valid
ports is 1 to
65535.
Enables or 0
disables the (disabled),
deskset from 1 (enabled)
receiving incoming
multicast pages
for that paging
zone. If disabled,
the deskset can
make outgoing
multicast pages
only.
Set the paging 1-10
zone priority from
1 to 10. Zones
with a priority
higher than
another zone can
interrupt the
lower-priority
zone's active
page.
Set the 1-10
call_priority_thre
shold. If the
paging zone
priority
(page_zone.x.prior
ity) is higher or
equal to the call
Default
blank
blank
blank
1
5
2
ed 1.0 167/175