3. Provisioning Menu
4. Reset to default
5. Restart phone
Network Setting
Use the Network setting menu to configure network-related settings for the phone.
Note: After you press
To use the Network setting menu:
1. From the Admin Settings menu, press or to highlight Network setting, then
press SELECT.
The Network setting menu appears.
2. Press or to highlight the desired option, then press OK:
DHCP
Set static IP
VLAN ID
Others (DNS and NTP servers).
To enable or disable DHCP:
1. From the Network setting menu, press or to highlight DHCP, then press SELECT.
2. Press or to select Enabled or Disabled, then press Save.
DHCP is enabled by default, which means the deskset will get its IP address from the
network. When DHCP is disabled, you must enter a static IP address for the deskset.
Note: You must be familiar with TCP/IP principles and protocols to configure static IP
settings.
To set static IP for the deskset:
1. From the Network setting menu, press or to highlight Set static IP, then press
OK.
If DHCP is disabled, the Set static IP menu appears. If DHCP is enabled, an error
message appears briefly before returning you to the Network setting menu.
Business IP Range Administration and Provisioning Guide
...
N. LINE N
1. Server
2. Login
3. Password
Press OK to display a screen that allows you to reset
the phone to factory default settings.
Press OK to display a screen that allows you to restart
the phone.
Save
for any of the network settings, the phone may restart.
ed 1.0
54/175