Handset Name - Alcatel Temporis IP100 Administration And Provisioning Manual

Each line corresponds to one handset; you can identify each handset by its name and
number. Handset number is shown at the top right corner on the idle screen. And each
column corresponds to one account.
In the example above, only Handset1 can use Account2 to send and receive calls. The
rest of accounts can be used by all handsets.
On top of that, you can select one default account per handset. This account will be
used to dial out except if you manually select another one. Other exceptions are those
cases where a dial out account is predefined: call log, speed dial and Contacts.
Again referring to the example above, all handsets will use Account1 to dial out by
default.
Handset account assignment settings are also available as parameters in the
configuration file. See "hs_settings" Module: Handset management Settings on page 169
Setting
Assigned accounts
hs_settings.x.assigned_account
(x is handset number, from 1 to
6)
Default account
hs_settings.x.default_account
(x is handset number, from 1 to
6)

Handset name

Each handset can be assigned a name to be displayed on the idle screen.
This configuration can be done as well using the handset Phone rename submenu. See
User Settings on page 62.
Business IP Range Administration and Provisioning Guide
Description
Lists accounts assigned
to a handset.
Account which will be
used to dial out, except if
there is a pre-assignment
or user manually selects
another one.
Range Default
Comma 1,2,3,4,5,6
separated
account index
list
1 to 6 1
ed 1.0 104/175