Phone Restart - Alcatel Temporis IP100 Administration And Provisioning Manual

Temporis IP100
Temporis IP150
Temporis IP300
Temporis IP700G
Alcatel IP2015
Conference IP1850
Thus, for example for Temporis IP300 the files would be Temporis_IP300.cfg and
Temporis_IP300_<MACAddress>.cfg
Note: if the url the phone obtains for provisioning file location is a full path including
file name, then only this one file download will be attempted.
3. Check updates. The phone maintains a list of the last loaded provisioning files and
their digital signature. The phone compares its current configuration against the files
it finds on the provisioning server.
4. If any of the changed settings require the phone to restart, the phone restarts.
During provisioning, the phone reads the configuration file and validates each module
and setting are validated. The phone considers a setting valid if it is:
a valid data type
formatted as a valid setting
within a valid data range
part of a module that passes an integrity check. That is, the module's settings are
consistent and logical. For example, in the "network" module, if DHCP is disabled, but no
static IP address is specified, the module will fail the integrity check and none of the
settings will apply.
Invalid modules or invalid settings are skipped and logged as ERRORs in the system log,
but will not interrupt the provisioning process. The system log will include the module
parameters that have not been applied. A recognized module with unrecognized settings
will cause all other settings in that module to be skipped.
A successful configuration or firmware update is reported as an INFO message in the
system log.
See Appendix A: Configuration File Settings for the options and value ranges available for
each configuration file setting.

Phone Restart

If the phone needs to restart after an auto-update, the restart happens only after the
phone has been idle for one minute.
To prevent users from delaying the update process, or to avoid phone restarts that might
interfere with incoming calls, either set the "repeatedly" resynchronization interval to a
suitable period, or upload any new configuration file(s) to your provisioning server after
work hours so that the phones will download the file(s) when there is little or no call
activity.
Business IP Range Administration and Provisioning Guide
Temporis_IP100
Temporis_IP150
Temporis_IP300
Temporis_IP700G
IP2015
IP1850
ed 1.0 140/175